Estimation of the Number of Rotor Slots and Rotor Speed in Induction Motors Using Current, Flux, or Vibration Signature Analysis
نویسندگان
چکیده
Effective condition monitoring of induction motors requires knowledge of the number of rotor slots and the rotor speed. These were primarily obtained in the literature by multiple measurements and using design knowledge of the motor under test. Furthermore, the earlier studies have mainly concentrated on stator current analysis. This paper investigates the use of the stator current, axial flux, and vibration signals in order to provide accurate rotor speed and rotor slot number estimation by utilising the eccentricity harmonics, slip frequency, rotor frequency, and rotor slot passing frequency. The proposed simple methods are verified using an extensive series of measurements on a 2.2 kW squirrel-cage and a 5 kW wound-rotor induction motor over a wide range of loading conditions.
منابع مشابه
A Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive
In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...
متن کاملA Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملComparison of MRAS Based Rotor Resistance Estimator Using Reactive Power and Flux Based Techniques for Space Vector PWM Inverter Fed Induction Motor Drives
The performance of Vector Controlled Induction Motor drive depends on the accuracy of rotor resistance which will vary with temperature and frequency. The MRAS approach using reactive power and flux as a state variable for rotor resistance estimation makes MRAS computationally simpler and easy to design. In this paper, Rotor Flux based MRAS (RF-MRAS) and Reactive Power based MRAS (RP-MRAS) for ...
متن کامل