DGS Based Legendre Low-Pass Filters for RF/Microwave
نویسندگان
چکیده
Abstract: The Legendre group of lowpass filters are designed and compared against several known types of filters at dB c f 3 = 2.5GHz in lumped elements, microstrip and DGS environment. In microstrip format the Legendre Polynomial Product (LPP)-312 and 213 filters have reduced group delay variation in the passband, sharper cut-off and wider impedance matching BW. In the DGS format the measured selectivity of Legendre, LPP-312 and LPP-213 lowpass filters are 28.3dB/GHz, 18.8B/GHz and 18.2B/GHz. Their 20dB rejection BW (RBW) are 6.0 GHz, 7.7GHz and 7.9 GHz; it covers 20dB rejection up to 4fc-5fc in the stopband. The LPP-213 has better than 15dB impedance matching BW (94%) and more than 20dB rejection BW (7.3GHz).
منابع مشابه
CPW Filters with Defected Ground Structures for RF and Microwave Applications
New coplanar waveguide (CPW) filters with a forkshaped defected ground structure (DGS) are proposed for radio-frequency (RF) and microwave applications. The miniature CPW DGS filters developed are based on the silicon technology. The filters are able to provide the bandstop characteristics with high attenuation in the stop band and low insertion loss in the pass band. A typical filter designed ...
متن کاملMicrostrip Interdigital Bandpass Filters: Design analysis
Conventionalmicrostriplowpass and bandpass filters such as stepped-impedance filters, open-stub filters, semilumped element filters, endand parallel-coupled half-wavelength resonator filters, hairpin-line filters, interdigital and combline filters, pseudocombline filters, and stub-line filters are widely used in many RF/microwave applications. Modern RF and microwave communication systems, spec...
متن کاملCompact Lowpass Filter Design by using Triangle Shape DGS
Most communication system contains an RF front end which performs signal processing with RF filters. Micro strip filters are a low cost means of doing this. Micro strip filters play various roles in wireless or mobile communication systems. There is an increasing demand for newer microwave and millimetre-wave systems to meet the emerging telecommunication challenges with respect to size, perfor...
متن کاملComparative Study of a Micro-strip Line with DGS and without DGS
The low pass filter is used in many application of microwave communication. Therefore it is necessary to design a good low pass filter for the faithful reproduction of wanted signals. Previously used methods to design the low pass filter using insertion loss method don’t give a very good flat response. So, a new method has been proposed for the filter design which gives a good response as compa...
متن کاملA Review of Defected Ground Structure (DGS) in Microwave Design
Electromagnetic bandgap (EBG) or alternatively called photonic band gap (PBG) structures have been attractive to obtain the function of unwanted frequency rejection and circuit size reduction. Researches on the PBG had been originally carried out in the optical frequency. Recently, there has been an increasing interest in microwave and millimeter wave applications of PBG circuits. This paper pr...
متن کامل