Active Feedback for Curing the Transverse Resistive Wall Instability in the Sps
نویسنده
چکیده
The resistive wall impedance in the SPS causes transverse coupled bunch instabilities, that have to be cured by active feedback. The status of the upgrade program for the feedback system (damper) will be reviewed. Results of machine development sessions of 1999 will be presented with emphasis on the performance with LHC type beam. Plans for the year 2000 run are outlined.
منابع مشابه
Collective Effects and Impedances in the RLHC(s)
We estimate coupling impedances and collective instability thresholds for the highand low-field options for the 50 TeV on 50 TeV Really Large Hadron Colliders discussed at the 1996 Snowmass workshop. Because of the large circumference of these machines, transverse instabilities tend to be dominant. The challenges for the high-field machine are similar in kind and magnitude to those faced by the...
متن کاملCommissioning of the Digital Transverse Bunch-by-bunch Feedback System for the TLS
Multi-bunch instabilities degrade beam quality through increased beam emittance, energy spread and even beam loss. Feedback systems are used to suppress multi-bunch instabilities associated with the resistive wall of the beam ducts, cavity-like structures, and trapped ions. A new digital transverse bunch-by-bunch feedback system has recently been commissioned at the Taiwan Light Source, and has...
متن کاملLongitudinal and Transverse Feedback Systems for Pls Storage Ring*
The Pohang Light Source (PLS) storage ring uses two bunch-by-bunch feedback systems a longitudinal feedback system (LFS) and a transverse feedback system (TFS) to cure the coupled bunch instabilities due to higher order modes of RF cavities and resistive wall impedance. The LFS employs the digital electronics developed for ALS and PEPII and uses a cavity-type kicker, and it was successfully com...
متن کاملActive Composite Rigidization Using Temperature-controlled Resistive Heating
An active approach for initiating rigidization in carbon-fiber reinforced polymer (CFRP) composites unites electrical resistivity to mechanical stiffening. Temperature control is implemented in efforts to reduce the curing time of the composite and to increase control of the curing process. Specifically, proportional-integral (PI) feedback control of internal resistive (Joule) heating establish...
متن کاملInvestigation of Resistive Wall Instability in the 7-GeV APS Storage Ring
The Advanced Photon Source (APS) storage ring is a 7-GeV light source with 40 straight sections. Intense x-ray beams will be delivered by 34 insertion devices installed in these straight sections. The vacuum chamber for the insertion devices has an elliptical cross section with the gap equal to 8 mm. With this narrow gap, we estimate that the transverse impedance of the ring at the revolution f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000