Far Casting Cross-Validation

نویسندگان

  • Patrick S. CARMACK
  • William R. SCHUCANY
  • Jeffrey S. SPENCE
  • Richard F. GUNST
  • Qihua LIN
  • Robert W. HALEY
چکیده

Cross-validation has long been used for choosing tuning parameters and other model selection tasks. It generally performs well provided the data are independent, or nearly so. Improvements have been suggested which address ordinary cross-validation’s (OCV) shortcomings in correlated data. Whereas these techniques have merit, they can still lead to poor model selection in correlated data or are not readily generalizable to high-dimensional data. The proposed solution, far casting cross-validation (FCCV), addresses these problems. FCCV withholds correlated neighbors in every aspect of the cross-validation procedure. The result is a technique that stresses a fitted model’s ability to extrapolate rather than interpolate. This generally leads to better model selection in correlated datasets. Whereas FCCV is less than optimal in the independence case, our improvement of OCV applies more generally to higher dimensional error processes and to both parametric and nonparametric model selection problems. To facilitate introduction, we consider only one application, namely estimating global bandwidths for curve estimation with local linear regression. We provide theoretical motivation and report some comparative results from a simulation experiment and on a time series of annual global temperature deviations. For such data, FCCV generally has lower average squared error when disturbances are correlated. Supplementary materials are available online.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Supercooled Simultaneous Composite Casting for Microstructure Refinement of Alloy

The objective of this work was to introduce a novel method for refining the solidification microstructure. Traditional casting usually solidifies one homogeneous liquid by removing heat from liquid surface, by which the microstructure solely depends on the heat removal rate for the given alloy composition. The newly developed multi-liquid composite simultaneous casting concept raises an alterna...

متن کامل

FEA-DOE Hybrid Modeling of Gravity Die Casting Process: A Review

In the present paper a review for the experimental and finite element analysis techniques is adopted for gravity die casting. Experimental Data taken for Solidification of gravity die Casting is modeled and meshed initially then validation is followed by comparing the experimental and modeled results. This helps to optimize the design criteria for gravity die cast part. To overcome the problem ...

متن کامل

Online Dynamic Control of Cooling in Continuous Casting of Thin Steel Slabs Activities

1) Efficient fundamental model of solidification and temperature in thin slab casting: CON1D 2) Software Sensor, CONSENSOR 3) Online control system development, CONONLINE 4) Laboratory measurement of water flow and heat transfer during spray cooling 5) Steel plant experiments for model validation 6) Understanding defect formation during continuous casting 7) Control of mold fluid flow 8) Advanc...

متن کامل

Experimental benchmark for casting problems

The problem motivating the current work is a mould filling during casting process. The aim of our analysis is to provide a simple experimental model simulating the main flow characteristics accompanying such process. Hence, the hot fluid is supplied under high pressure into an inclined box. Fluid flows inside the box between two cold isothermal walls, passing obstacles simulating internal compl...

متن کامل

Modeling and Simulation with Experimental Validation of Temperature Distribution during Solidification Process in Sand Casting

The solidification of metals continues to be a phenomenon of great interest to physicists, metallurgists, casting engineers and software developers. It is a non-linear transient phenomenon, posing a challenge in terms of modelling and analysis. During the solidification of a casting in a mould, the heat-transfer between the casting and the mould plays a vital role. This paper attempts to study ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009