Design and Analysis of Quad-Band Rectangular Microstrip Patch Antenna
نویسندگان
چکیده
This paper proposes the rectangular microstrip patch antenna suitable to operate in different frequency bands. The rectangular microstrip patch antenna is designed and simulated using IE3D simulation software. The result obtained shows that the designed antenna is suitable for operation in four different frequency bands with bandwidth of 6.90%, 2.33%, 12.02% and 2.74% .The resonating behavior in different frequency bands makes this antenna structure suitable for different types of applications with an antenna gain of 5.509dBi and antenna efficiency of 89%.
منابع مشابه
Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملNonlinear Modeling, Analysis and Design of an Active Antenna in S Frequency Band
An active antenna for transmitter application in S frequency band is designed and analyzed using harmonic balance technique which is based on the nonlinear model of active devices. In this active antenna, the amplifier is integrated with the radiator which is a rectangular patch antenna. This patch antenna is analyzed employing full-wave momentum method. By applying nonlinear model of transisto...
متن کاملDesign and Development of Quad-Band H-Shaped Microstrip Patch Antenna for WiFi and LTE Applications
The increasing demand in portable devices with wireless connectivity provides a challenge to design a RF front antenna. Microstrip patch antennas are widely used because they are of light weight, compact, easy to integrate. However the serious problem of patch antenna is their narrow band due to surface losses and large size of patch for better performance. So for the antenna miniaturization an...
متن کاملA Novel Quad-band Printed Antenna Design using a Multi-Slotted Patch for Cellular Communication
This article proposes a quad band patch antenna for mobile communication. The design requirements are to meet the 0.9 GHz, 1.8 GHz, 2.1 GHz and 2.45 GHz bands. The proposed antenna consists of a rectangular patch monopole printed antenna in which slotting technique is used to achieve multi band resonance. The Patch with three slotted lines generates four resonating frequencies to cover 0.9 GHz ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012