Effect of Step Sintering on Breakdown Voltage of Varistors Prepared from Nanomaterials
نویسندگان
چکیده
منابع مشابه
The effect of composition on flash sintering parameters of varistors based on ZBS
Flash sintering is one of the latest sintering processes of ceramics, which has recently attracted the attention of researchers due to its high sintering speed and significant energy reduction. An essential feature of successful flash is negative temperature coefficient (NTC) semiconductor behavior. In this research, the flash sinter process of ceramic varistor based on ZnO-Bi2O3-Sb2O3 (ZBS) ha...
متن کاملThe Role of Polypyrrole in Electrical Properties of ZnO-Polymer Composite Varistors
Composite films on the base of ZnO with different weight percentages of polypyrrole have been prepared using the hot pressing method and their current-voltage characteristics have been studied. Results show that the films have nonlinear varistor behavior and can be used to protect sensitive circuits from 110V up to 350V overvoltages. It is found that the higher the content...
متن کاملLOW-TEMPERATURE SINTERING OF HIGH VOLTAGE GRADIENT ZnO-BASED THICK FILM VARISTORS
High voltage gradient ZnO-based thick film varistors were fabricated by low-temperature sintering. The effect of sintering temperature on electrical properties of thick film varistors was investigated. The voltage gradient of thick film varistors increased significantly to 3159.4 V/mm after sintering at 725°C for 30 min. The small average grain size with good grain boundaries was the origin for...
متن کاملMicrovaristors in thick-film and LTCC circuits
ZnO-based varistors protect electronic circuits against overvoltage. High temperature from the range of 1150–1300 C is required for proper sintering of such material. Varistor inks with lower firing temperature are needed for application in thick-film and LTCC technology. ZnO-based thick-film composition was prepared and varistors were fabricated on alumina and LTCC substrate. Different topolog...
متن کاملSynthesis Mechanism of Low-Voltage Praseodymium Oxide Doped Zinc Oxide Varistor Ceramics Prepared Through Modified Citrate Gel Coating
High demands on low-voltage electronics have increased the need for zinc oxide (ZnO) varistors with fast response, highly non-linear current-voltage characteristics and energy absorption capabilities at low breakdown voltage. However, trade-off between breakdown voltage and grain size poses a critical bottle-neck in the production of low-voltage varistors. The present study highlights the synth...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013