Optical properties of light emitting diodes with a cascading plasmonic grating.
نویسندگان
چکیده
In this paper, the polarization dependent optical properties of InGaN/GaN multi-quantum wells (MQWs) LED with cascading plasmonic gratings are investigated using an angle-resolved photoluminescence (ARPL) spectrometer. The plasmonic gratings consist of two Ag gratings with a half-pitch displacement. The ARPL spectra of the TE-TM state present a broadband emission with resonance dips occasioned by the SP resonance while the TM-TE state presents resonance peaks with low sideband emission. The resonance properties can be tuned by modifying the geometric parameters of the plasmonic grating. The ARPL spectrum of the LED sample with pure GaN 1D grating is also measured and discussed. The investigated plasmonics LED represents resonance optical properties different from the conventional surface relief LED, which can be used in special applications.
منابع مشابه
Optical properties of highly polarized InGaN light-emitting diodes modified by plasmonic metallic grating.
We implement finite-difference time-domain (FDTD) method to simulate the optical properties of highly polarized InGaN light emitting diodes (LEDs) coupled with metallic grating structure. The Purcell factor (Fp), light extraction efficiency (LEE), internal quantum efficiency (IQE), external quantum efficiency (EQE), and modulation frequency are calculated for different polarized emissions. Our ...
متن کاملThin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کاملImproving the optical properties of thin film plasmonic solar cells of InP absorber layer using nanowires
In this paper, a thin-film InP-based solar cell designed and simulated. The proposed InP solar cell has a periodic array of plasmonic back-reflector, which consists of a silver layer and two silver nanowires. The indium tin oxide (ITO) layer also utilized as an anti-reflection coating (ARC) layer on top. The design creates a light-trapping structure by using a plasmonic back-reflector and an an...
متن کاملHybrid FIB milling strategy for the fabrication of plasmonic nanostructures on semiconductor substrates
The optical properties of plasmonic semiconductor devices fabricated by focused ion beam (FIB) milling deteriorate because of the amorphisation of the semiconductor substrate. This study explores the effects of combining traditional 30 kV FIB milling with 5 kV FIB patterning to minimise the semiconductor damage and at the same time maintain high spatial resolution. The use of reduced accelerati...
متن کاملFar-field Tunable Nano-focusing Based on Metallic Slits Surrounded with Nonlinear- Variant Widths and Linear-variant Depths of Circular Dielectric Grating
In this work, we present a new design of a tunable nanofocusing lens using a circular grating of linear-variant depths and nonlinear-variant widths. Constructive interference of cylindrical surface plasmon launched by the subwavelength metallic structure forms a subdiffraction-limited focus, the focal length can be adjusted by varying the geometry of each groove in the circular grating. Accordi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 18 25 شماره
صفحات -
تاریخ انتشار 2010