Broadband Vibration Measurements Using a Continuously Scanning Laser Vibrometer

نویسندگان

  • Steve Vanlanduit
  • Patrick Guillaume
  • Johan Schoukens
چکیده

In this article we will apply the continuously scanning vibrometer measurement principle introduced in literature for stepped sine measurementsto broadband excitations. Special attention will be given to the errors which are introduced in the procedure. Also, a method will be proposed to estimate the complexity of the vibration patterns. Different scanning signals to cover the measured area of the device under test will be studied.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Acoustic-to-Seismic Landmine Detection Using a Continuously Scanning Laser Doppler Vibrometer

A single beam laser Doppler vibrometer (LDV) has been used in acoustic-to-seismic landmine detection in a stop-andstare scanning mode [Sabatier, J. M. and Xiang, N. IEEE Trans. Geoscience and Remote Sensing 39, 2001, pp.11461154.; Xiang, N. and Sabatier, J. M., J. Acoust. Soc. Am. 113, Mar. 2003]. One of the major requirements is the operational scanning speed in the acoustic detection methods....

متن کامل

Non-contact measurement of facial surface vibration patterns during singing by scanning laser Doppler vibrometer

This paper presents a method of measuring the vibration patterns on facial surfaces by using a scanning laser Doppler vibrometer (LDV). The surfaces of the face, neck, and body vibrate during phonation and, according to Titze (2001), these vibrations occur when aerodynamic energy is efficiently converted into acoustic energy at the glottis. A vocalist's vibration velocity patterns may therefore...

متن کامل

Integrating MEMS Electro-Static Driven Micro-Probe and Laser Doppler Vibrometer for Non-Contact Vibration Mode SPM System Design

This research integrated a MEMS electrostatic driven micro-probe and a laser Doppler vibrometer for non-contact vibration mode scanning probe microscope system design. The microprobe tip was placed in perpendicular to the sample surface, and the built-in capacitor on the microprobe was excited to vibrate by a sinusoidal drive voltage to generate Coulomb electrostatic force. The applied frequenc...

متن کامل

A Study of Tissue Vibration Transmissibility Using a Scanning Laser Vibrometer

Prolonged exposure to vibration has been associated with the development of handarm vibration syndrome (HAVS). While vibration is known to have adverse physiological effects on the tissues of the human hand, it is still unclear how these physiological effects are influenced by factors such as tissue thickness or vibration intensity, frequency, and duration. Understanding the response of the han...

متن کامل

Integrating External Sensors into Scanning Vibrometer Measurements

Integration as described here requires the 8.5 version of the PSV software, as new functions are required in the signal processor, for example ReIndex. The 1-D or 3-D PSV vibration measurement data must be available with the geometry, i.e. the geometry is either importe-(for example from an FE model) or it is defined and measured using the PSV software. For this purpose, the software option PSV...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003