A cost-effective method to immobilize hydrated soft-tissue samples for atomic force microscopy.
نویسندگان
چکیده
Immobilizing hydrated soft tissue specimens for atomic force microscopy (AFM) is a challenge. Here, we describe a simple and very cost-effective immobilization method, based on the use of transglutaminase in an aqueous environment, and successfully apply it to AFM characterization of human native Wharton's Jelly (nWJ), the gelatinous connective tissue matrix of the umbilical cord. A side-by-side comparison with a widely used polyphenolic protein-based tissue adhesive (Corning Cell-Tak), which is known to bind strongly to virtually all inorganic and organic surfaces in aqueous environments, shows that both adhesives successfully immobilize nWJ in its physological hydrated state. The cost of transglutaminase, however, is over 3000-fold lower than that of Cell-Tak, making it a very attractive method for immobilizing soft tissues for AFM characterization.
منابع مشابه
Robust and artifact-free mounting of tissue samples for atomic force microscopy.
Immobilization of tissue-samples for atomic for microscopy (AFM) is typically done using either semi-dry tissue or by gluing the tissue sample down, both of which can introduce artifacts. Here, we describe the design of a Soft- Clamping Immobilizing Retainer of Tissue (SCIRT) for consistent and nondestructive immobilization of tissues for AFM analysis. We compare the performance of our SCIRT me...
متن کاملSensitivity Analysis of Frequency Response of Atomic Force Microscopy in Liquid Environment on Cantilever's Geometrical Parameters
In this paper, the non-linear dynamic response of rectangular atomic force microscopy in tapping mode is considered. The effect of cantilever’s geometrical parameters (e.g., cantilever length, width, thickness, tip length and the angle between the cantilever and the sample's surface in liquid environment has been studied by taking into account the interaction forces. Results indicate that the r...
متن کاملMagnetic force microscopy using fabricated cobalt-coated carbon nanotubes probes
Magnetic force microscope ( MFM ) is a powerful technique for mapping the magnetic force gradient above the sample surface. Herein, single-wall carbon nanotubes (SWCNT) were used to fabricate MFM probe by dielectrophoresis method which is a reproducible and cost-effective technique. The effect of induced voltage on the deposition manner of carbon nanotubes (CNT) on the atomic force microscope (...
متن کاملAtomic Force Microscopy in Detection of Viruses
Properties of biological samples, such as DNA, proteins, components of bacterial surfaces and viruses have been studied extensively and provided the driving force for the outstanding progress of detection methods used in cell biology and physiology. Methods like magnetic twisting cytometry, laser-tracking microrheology, magnetic tweezers, the optical stretcher, and various cell indenters; have ...
متن کاملPreparation of oriented, fully hydrated lipid samples for structure determination using X-ray scattering.
This chapter describes a method of sample preparation called "the rock and roll method," which is basically a solvent evaporation technique with controlled manual sample movement during evaporation of solvent from lipid/solvent mixtures that produces well-oriented thick stacks of about 2000 lipid bilayers. Many lipid types have been oriented using different solvent mixtures that balance solubil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- BioTechniques
دوره 61 4 شماره
صفحات -
تاریخ انتشار 2016