Behavioral modeling in micro simulation models . A survey
نویسنده
چکیده
Micro-simulation is an approach to analyze the impact of economic and social policy on the distribution of target variables, not just on the means. It easily includes the true policy instruments and handles highly nonlinear relations. Most models currently used in policy analysis are static and they do not include behavioral response to policy changes, just their first order effects. There is, however, an increasing demand for dynamic models including behavioral responses. This paper surveys current theory and practice in micro-simulation with an emphasis on behavioral modeling, and discusses issues of model building, data availability, estimation, testing and validation.
منابع مشابه
Behavioral Modeling and Simulation of Semiconductor Devices and Circuits Using VHDL-AMS
During the past few years, a lot of work has been done on behavioral models and simulation tools. But a need for modeling strategy still remains. The VHDL-AMS language supports the description of analog electronic circuits using Ordinary Differential Algebraic Equations (ODAEs), in addition to its support for describing discrete-event systems. For VHDL-AMS to be useful to the analog design ...
متن کاملMicro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts
Accurate modeling of masonry has been a major concern of the researchers in the past decades. Besides reinforced and unreinforced masonry structures, masonry can be found in frame structures as infill panels which are used as partitions and/or external walls. These elements role as a part of structure and introduce a large degree of nonlinearity into the system. In this study, a micro-modeling ...
متن کاملNumerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملMEMS behavioral simulation: a potential use for Physics of Failure (PoF) modeling
The reliability of MEMS based systems might be increased by the use of a Physics of Failure (PoF) methodology. This methodology necessitates the development of corresponding models that can be used for reliability evaluation. The model development is based on a good knowledge of effects of environmental influences on the MEMS. For the reliability evaluation of MEMS based systems the used models...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997