Device Cleaning and Infection Control in Aerosol Therapy.

نویسنده

  • Catherine A O'Malley
چکیده

Aerosol delivery equipment used to administer inhaled medications includes the nebulizer, positive expiratory pressure devices added to the nebulizer, and valved holding chambers (spacers). These devices are semi-critical medical devices, and as such, infection prevention and control (IPC) guidelines recommend that they be cleaned, disinfected, rinsed with sterile water, and air-dried. There is confusion surrounding the care of aerosol devices because of inconsistencies in the various published IPC guidelines, lack of a standard of practice among institutions and respiratory therapists (RTs), and manufacturer's instructions for use of these devices are not always compatible with guidelines or practice. Challenges lie in awareness of IPC guidelines and establishing a standard for the care of aerosol delivery devices among all stakeholders/manufacturers, governments, vendors, and users. The latest IPC guideline from the Cystic Fibrosis Foundation, reviewed and endorsed by the Society for Healthcare Epidemiology of America and the Association for Professionals in Infection Control, has a recommendation for disposable nebulizers and a recommendation for reusable nebulizers. Reusable nebulizers should be cleaned, disinfected, rinsed with sterile water (if using a cold disinfectant), and air-dried between uses. The mouthpiece/mask of disposable nebulizers should be wiped with an alcohol pad, the residual volume should be rinsed out with sterile water after use, and the nebulizer should be replaced every 24 h. The RT plays a significant and responsible role in providing and teaching aerosol therapy to patients. The RT and all stakeholders need to work together to provide a standard of care for the safe use of aerosol delivery devices.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تاثیر وسیله کاهنده آئروسل بر پراکندگی آئروسل های عفونی به هنگام جرمگیری اولتراسونیک

Statement of Problem: Ultrasonic Scaling is one of the main sources of producing infected aerosols in dentistry. These aerosols are able to spread pathogens such as microorganisms associated with tuberculosis, conjunctivitis, influenza and other respiratory diseases, herpetic and other skin diseases, ADIS and hepatitis B.Purpose: The aim of this study was to investigate the clinical effective...

متن کامل

Disinfection and general cleaning practices used in health care centers and hospitals

Improving cleaning and disinfection performance must be taken into account for prevention and control of infection. Health care settings are engaged in a battle against healthcare associated infection (HAIs). The importance of infection prevention and control is increasing due to rapidly developing strains of multi-drug resistant organisms (MDROs) that can result in serious illness and even dea...

متن کامل

ارزیابی خطر انتقال عفونت های بیمارستانی در بخش مراقبت های ویژه بیمارستان بهشتی کاشان درسال 1390

Background: Microbial contaminations occurred in “Intensive Care Unit” (ICU) is the substantial cause of infection transmission within hospitals. The infectious organisms can be transmitted mainly through contact with the surface of instruments. Indicating the contaminated sources is the primary step during the infection control program. This study aimed to evaluate the risk of cross infection ...

متن کامل

The Most Cost Effective Gas Cleaning Device in Steel Industry with Industrial Ecology Approach

Industrial growth and environmental damages, as two important indicators in sustainable development are followed by steel industry. This article leads industries to green industry. In this case, energy, material, capital consumption and environmental damages as sustainability patterns of environment have been investigated in three different dust collectors to select the most environmentally sui...

متن کامل

Removal of 10-nm contaminant particles from a wafer surface with supersonic CO2 particle beam

Contaminant control is becoming a major issue of nanoscale device. Cryogenic aerosol beam using micron-sized aerosol particles has long been successfully used to remove contaminant particles (CPs) down to 50nm, and supersonic particle beam using particles smaller than 100nm lowered the limit of cleaning down to 20nm size. In this study, the supersonic particle beam technique that uses nanometer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Respiratory care

دوره 60 6  شماره 

صفحات  -

تاریخ انتشار 2015