High Power Soft – switching IGBT DC – DC Converter

نویسندگان

  • Neven Čobanov
  • Željko Jakopović
  • Viktor Šunde
چکیده

A soft-switching topology for high power buck converter is proposed. Zero-current turn-on and zero-voltage turn-off is achieved without auxiliary switches. All active switches in the converter transmit power to the load equally. Converter control is simple despite four active switches. Converter operation is described and DC analysis is carried out. All operation modes are identified. The condition for soft-switching is derived. A full-scale 38 kW laboratory prototype with 1700 V IGBT modules is built for railway application. Switching frequency is fixed at 20 kHz. Experimental results are shown. The results confirm the analysis. A high efficiency of 97 % is achieved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Soft Switched DC-DC Boost Converter for Use in Grid Connected Inverters

This paper presents a soft-switching DC-DC boost converter, which can be utilized in renewable energy systems such as photovoltaic array, and wind turbine connections to infinite bus of a big power network, using grid connected inverters. In the proposed topology for the DC-DC boost converter, the main and the auxiliary power switches are turned on and turned off with zero voltage switching (ZV...

متن کامل

A High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications

This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...

متن کامل

Simulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching

A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...

متن کامل

High voltage gain DC-DC resonant converter

In this paper, a DC-DC resonant converter with high voltage gain and small size is studied. To reduce the size and weight of this converter, the operating frequency should be as high as possible. In this research, the frequency changes from 120 to 200 kHz. Due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. Resonant converters are su...

متن کامل

Soft-switching Ps-pwm Dc-dc Converter for Arc Welding

Soft-switching DC-DC converter using Phase-Shifted Pulse Width Modulation (PS-PWM) on secondary side of highfrequency transformer is described in the paper. The converter consists of a full-bridge inverter fitted with fast IGBT transistors. The output power of the converter is controlled by rectifier made up of two snap-off diodes in series with MOSFET transistors which is connected on secondar...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013