Multipurpose Three Dimensional Finite Element Procedure for Thermal Analysis in Pulsed Current Gas Tungsten Arc Welding of AZ 31B Magnesium Alloy Sheets
نویسنده
چکیده
This paper presents the results of a study aimed at establishing the temperature distribution during the welding of magnesium alloy sheets by Pulsed Current Gas Tungsten Arc Welding (PCGTAW) and Constant Current Gas Tungsten Arc Welding (CCGTAW) processes. Pulsing of the GTAW welding current influences the dimensions and solidification rate of the fused zone, it also reduces the weld pool volume hence a narrower bead. In this investigation, the base material considered was 2mm thin AZ 31 B magnesium alloy, which is finding use in aircraft, automobile and high-speed train components. A finite element analysis was carried out using ANSYS, and the results of the FEA were compared with the experimental results. It is evident from this study that the finite element analysis using ANSYS can be effectively used to model PCGTAW process for finding temperature distribution. Keywords—gas tungsten arc welding, pulsed current, finite element analysis, thermal analysis, magnesium alloy.
منابع مشابه
Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
Although a few models have been proposed for 3D simulation of different welding processes, 2D models are still more effective in design goals, thus more popular due to the short-time analysis. In this research, replacing "time" by the "third dimension of place", the gas tungsten arc welding process was simulated by the finite element method in two dimensions and in a short time with acceptable ...
متن کاملOptimization of the Pulsed Gas Tungsten Arc Welding in Dissimilar Joining Austenitic Stainless Steel AISI 316L to Nickel-Base Super Alloy of Monel 400
In this research, optimization of the pulsed gas tungsten arc welding including pulse current, background current, pulse frequency and on time were investigated in welding of non-similar materials of austenitic stainless steel AISI 316L and nickel-base super alloy of Monel 400 by using ERNiCr3 filler metal. In order to obtain optimum conditions of welding the Taguchi method with the L9 array wa...
متن کاملD finite element modeling of the thermally induced residual stress in the hybrid aser/arc welding of lap joint
In this study, a three-dimensional (3D)finite elementmodel is developed to investigate thermally induced stress field during hybrid laser–gas tungsten arc welding (GTAW) process. In the hybridwelding case, we focus on the GTAWprocess sharing commonmolten poolwith laser beam and playing an augment role in thehybridweldingsystem.Anexperiment-based thermalanalysis isperformedtoobtain the temperatu...
متن کاملEffect of welding parameters on pitting corrosion rate of pulsed current micro plasma arc welded AISI 304L sheets in 1N HCl
Austenitic stainless steel sheets have gained wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance such as metal bellows used in expansion joints in aircraft, aerospace and petroleum industries. In the case of single pass welding of thinner sections of this alloy, Pulsed Current Micro Plasma Arc Welding (PCMPAW) has been found bene...
متن کاملDevelopment of Mathematical Model on Gas Tungsten Arc Welding Process Parameters
GAS TUNGSTEN ARC WELDING (GTAW) is the quality weld process. It is preferred welding process for stainless steel, low alloy steel, nickel, cobalt, titanium, aluminum, copper, and magnesium. The present work aims to evaluate the effect of Gas Tungsten Arc Welding process parameters on the quality of the weld bead. The process parameters Welding Current, Wire Diameter, Wire Feed Speed, Ratio of w...
متن کامل