Effect of Freeze-Thaw Treatment on the Precipitation of Octyl β-D-Galactoside Hemihydrate Crystal from the Aqueous Solution.

نویسندگان

  • Shigesaburo Ogawa
  • Isao Takahashi
  • Maito Koga
  • Kouichi Asakura
  • Shuichi Osanai
چکیده

Cryogenic treatment, like the freeze-thaw process, has been reported to be effective in modifying the physicochemical properties of polymeric hydrogels. However, not much attention has been paid to this process in terms of the precipitation of surfactant-water systems. In this study, two effective cryogenic methodologies were successfully reported to alter the physicochemical properties of a precipitate of an octyl β-D-galactoside (Oct-Gal)-water system. First, hyperrapid cooling (i.e., cooling at 30°C/min) was found to be an effective type of cryogenic treatment: the phase transition temperature (TK) and enthalpy at the phase transition (∆HK) between the crystal-dispersed phase and the sol (micelle) phase significantly decreased. In addition, cryogenic treatment in the presence of electrolytes, such as NaCl, NaBr, and CsCl, was effective even in the absence of the hyperrapid cooling condition. The hyperrapid cooling or the addition of certain electrolytes was considered to prevent the precipitation of the Oct-Gal hemihydrate crystals prior to the complete freezing of ice and the electrolyte/ice eutectic. Hence, the size of the aggregated crystals prepared by the above-mentioned effective cryogenic treatments seemed to be decreased compared with that of the normal precipitated crystals, thereby changing TK and ∆HK. Thus, two basic methodologies for the modification of the physicochemical properties of the crystal-dispersed phase of surfactant-water systems are discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study)

In an era of continued economic development around the globe, numerous rock-related projects including mining and gas/oil exploration are undertaken in regions with cold climates. Winters in the Iranian western and northwestern provinces are characterized by a high precipitation rate and a cold weather. Under such conditions, rocks are exposed to long freezing periods and several freeze-thaw (F...

متن کامل

Effects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar

Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...

متن کامل

Effect of Antioxidant D-Aspartic Acid and Thawing Rate on the Freeze-Thawing Process of Ram Semen

The study was conducted to determine the influence of D-aspartic acid (D-Asp) as antioxidant supplement and thawing rates on ram sperm motility, membrane integrity, abnormality, viability, mitochondria activity, malondialdehyde and antioxidant activities, and total antioxidant capacity after freezing-thawing process. Semen samples from five mature rams (3-4 years old) were diluted with extender...

متن کامل

Rock Brittleness Prediction Using Geomechanical Properties of Hamekasi Limestone: Regression and Artificial Neural Networks Analysis

The cold climate is a favorable parameter for the development of tension cracks and decrease of rock brittleness. Therefore, this paper attempts to investigate the Hamekasi porous limestone in order to predict the brittleness indices during freeze-thaw cycles. The freeze–thaw test was executed for one cycle including 16 h of freezing, and 8 h of thawing. The geo mechanical properties and brittl...

متن کامل

Strength Characteristics of Clay Mixtures with Waste Materials in Freeze-Thaw Cycles

Waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. These problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. Such materials may be subjected...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of oleo science

دوره   شماره 

صفحات  -

تاریخ انتشار 2018