Manganese pigmented anodized copper as solar selective absorber
ثبت نشده
چکیده
The study concerns the optical and structural properties of layers obtained by a new efficient surface treatment totally free of chromium species. The process is made up of an anodic oxidation of copper in an alkaline solution followed by an alkaline potassium permanganate dipping post-treatment. Coatings, obtained at the lab and pilot scales, are stable up to 220 C in air and vacuum, present low emissivity (0.14 at 70 C) and high solar absorptivity (0.96), i.e. a suitable thermal efficiency (0.84 at 70 C).
منابع مشابه
Solvothermal Synthesis of Cobalt and Copper Sulfides Nanoparticles with High Light Absorptance for New Solar Selective Coatings
New selective coating materials are developed and used in advanced solar collector and absorber designs with improved efficiency. Cobalt and Copper sulfides nanoparticles are high interest for absorbers of solar thermal collectors due to their optical properties and high absorptance in the solar wavelength range (> 96%). In the present work, Cobalt and Copper sulfides nanoparticles were synthes...
متن کاملSelective Solar Absorber Materials: Nanostructured Surfaces
Current solar to thermal energy conversion technologies, including concentrated solar power (CSP) and solar water heaters (SWH) utilize absorber surfaces that collect incident solar radiation. However, these absorber surfaces emit thermal energy (at their temperature) in the infrared (IR) spectrum, resulting in decreased overall efficiency for solar-to-thermal conversion. Selective absorber sur...
متن کاملTechno-Economic Analysis of Solar Water Heating Systems in Turkey
In this study, solar water heater was investigated using meteorological and geographical data of 129 sites over Turkey. Three different collector types were compared in terms of absorber material (copper, galvanized sheet and selective absorber). Energy requirement for water heating, collector performances, and economical indicators were calculated with formulations using observed data. Results...
متن کاملMicro Solar Thermal Power Harvesting using Thermoelectric Generator
ABSTRACT The use of a thermoelectric generator (TEG) in generating useful power from solar thermal energy is demonstrated. This device represents a portable and autonomous power generation system operating from solar power, capable of powering micro/nano systems. The TEG was integrated with a micro solar thermal collector plate to enhance the thermal radiation absorption capacity of the hot sid...
متن کاملExperimental Investigation on the Effect of Partially Metal Foam inside the Absorber of Parabolic Trough Solar Collector
In the present work the efficiency of a solar parabolic trough has been investigated experimentality. parabolic trough solar collector constitute a proven source of thermal energy for industrial process heat and power genaration. The impact of using the partially porous media in the absorber on the efficiency of PTC (parabolic trough collector) has been investigated. The porosity of copper foa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007