System for Testing Analog-to-Digital Converters
نویسنده
چکیده
This paper presents a system named ADC TEST that estimates the static and dynamic parameters of an analog-to-digital converter according to the definitions given in IEEE Standard 1241. One shows the available output graphical pages with theirs information and facilities in a practical testing application.
منابع مشابه
Improving adaptive resolution of analog to digital converters using least squares mean method
This paper presents an adaptive digital resolution improvement method for extrapolating and recursive analog-to-digital converters (ADCs). The presented adaptively enhanced ADC (AE-ADC) digitally estimates the digital equivalent of the input signal by utilizing an adaptive digital filter (ADF). The least mean squares (LMS) algorithm also determines the coefficients of the ADF block. In this sch...
متن کاملAnalysis of Integral Nonlinearity in Radix-4 Pipelined Analog-to-Digital Converters
In this paper an analytic approach to estimate the nonlinearity of radix-4 pipelined analog-to-digital converters due to the circuit non-idealities is presented. Output voltage of each stage is modeled as sum of the ideal output voltage and non-ideal output voltage (error voltage), in which non-ideal output voltage is created by capacitor mismatch, comparator offset, input offset, and finite ga...
متن کامل1.8V 0.18µm CMOS Novel Successive Approximation ADC
With the increased sophistication of System-on-Chip (SOC) architectures comes an increased need for low power Analog to Digital converters. These converters have many uses including Built-in-Self-Test (BIST) applications. In this paper, we present a novel Successive Approximation ADC. We show how one can utilize an existing DAC structure on an SOC to realize an effective Analog-to-Digital conve...
متن کاملMeasurement Accuracy of Oscillation-Based Test of Analog-to-Digital Converters
© 2010 ETRI Journal, Volume 32, Number 1, February 2010 Oscillation-based testing of analog-to-digital converters represents a viable option for low-cost built-in self-testing in mixed-signal design. While numerous papers have addressed implementation issues, little attention has been paid to the measurement accuracy. In this letter, we highlight an inherent measurement uncertainty which has to...
متن کاملPerformance Testing of Logarithmic Analog- To-digital Converters
Abstract This paper describes test procedures to characterize the behavior of logarithmic analog-to-digital converters. Logarithmic A/D converters are usually characterized in terms of signal-to-noise ratio (SNR) or in deviation of the ideal characteristic in dB. There are a lack of test methods definition in the literature, as can be observed in the IEEE standard 1241 for these type of convert...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002