High-rate performance of a mixed olivine cathode with off-stoichiometric composition.
نویسندگان
چکیده
We highlight that the off-stoichiometric compositional variation is a simply effective method to improve the power density of LiFe0.6Mn0.4PO4. This strategy does not require a supplementary separate coating and is likely applicable to other compositions given the feasibility of the method.
منابع مشابه
High-rate performance of a mixed olivine cathode with off-stoichiometric composition - C5CC04434K
Superior operating safety with long cycle life and lowmaterial cost makes lithium iron phosphate (LiFePO4) an important Li storage material. For this olivine compound, many efforts have been expended in order to achieve desirable electrochemical properties such as particle nanosizing and applying electrically conductive coating. However, these processes reduce tap density and therefore lower pr...
متن کاملPerformance Characteristics of a PEM Fuel Cell with Parallel Flow Channels at Different Cathode Relative Humidity Levels
In fuel cells flow configuration and operating conditions such as cell temperature, humidity at each electrode and stoichiometric number are very crucial for improving performance. Too many flow channels could enhance the performance but result in high parasite loss. Therefore a trade-off between pressure drop and efficiency of a fuel cell should be considered for optimum design. This work focu...
متن کاملPhospho-Olivine as Advanced Cathode Material for Lithium Batteries
Nano-sized and micron-sized LiFePO4 electrode materials were prepared by a sol gel and coprecipitation reactions. An improvement of the cycling and rate performances in lithium cells was observed for the carbon coated LiFePO4 materials. The coating process uses a solid/gas-phase reaction which consists of decomposing propylene gas, as carbon source, inside a reactor containing olivine LiFePO4 m...
متن کاملThe Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type o...
متن کاملCrystal orientation tuning of LiFePO4 nanoplates for high rate lithium battery cathode materials.
We report the crystal orientation tuning of LiFePO(4) nanoplates for high rate lithium battery cathode materials. Olivine LiFePO(4) nanoplates can be easily prepared by glycol-based solvothermal process, and the largest crystallographic facet of the LiFePO(4) nanoplates, as well as so-caused electrochemical performances, can be tuned by the mixing procedure of starting materials. LiFePO(4) nano...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 51 68 شماره
صفحات -
تاریخ انتشار 2015