THERMO-MECHANICAL CHARACTERIZATION OF NiTiCu AND NiTi SMA ACTUATORS: INFLUENCE OF PLASTIC STRAINS
نویسندگان
چکیده
The focus of this study is the thermomechanical characterization and comparison between two different shape memory alloys (SMAs) quantifying the effect of plastic strain on the transformation characteristics of SMA actuators. In this study, the thermomechanical response and transformation characteristics of a NiTiCu and a NiTi SMA are studied as a function of the induced plastic strain for four different loading paths: 1) an elastic-plastic loading of the austenitic phase, 2) a stress-induced martensitic phase transformation, 3) an elastic-detwinningplastic loading of the martensitic phase and 4) thermally-induced phase transformation under a constant applied stress. Each loading path is repeated multiple times, with an incremental change of the total applied strain, to determine the effect of accumulated plastic strain on the phase transformation characteristics of the two SMA material systems. The effects of plastic strain are quantified by measurements of recoverable strain during a thermal cycle under zero applied stress, measurements of heat of transformation from a differential scanning calorimeter and microstructural evaluations. * Graduate Research Assistant, E-mail: [email protected] § Professor, E-mail: [email protected]
منابع مشابه
New Developments on Mini/Micro Shape Memory Actuators
In the actuation field, the most common shape memory alloy is quasi-equiatomic NiTi system, commercially known as Nitinol®. Ti-rich NiTi compounds show characteristic transformation temperatures higher than the room one and they can recover high values of deformation. Moreover, these intermetallic compounds are widely used since they exhibit high thermal and mechanical cycling stability. Other ...
متن کاملThe Step-Wise Martensite to Austenite Reversible Transformation Stimulated by a Stress State
In shape memory alloys the Thermoelastic Martensitic Transformation (TMT), intrinsically stepwise, can be either thermally induced or stress-induced. Moreover, it has already been shown that an extrinsic fragmentation of thermally induced transformation can be stimulated ("Step-wise Martensite to Austenite Reversible Transformation", SMART) by means of Incomplete Cycles on Heating (ICHs): the S...
متن کاملGains from diversification on convex combinations: A majorization and stochastic dominance approach
By incorporating both majorization theory and stochastic dominance theory, this paper presents a general theory and a unifying framework for determining the diversification preferences of risk-averse investors and conditions under which they would unanimously judge a particular asset to be superior. In particular, we develop a theory for comparing the preferences of different convex combination...
متن کاملImproved immunogenicity of tetanus toxoid by Brucella abortus S19 LPS adjuvant.
BACKGROUND Adjuvants are used to increase the immunogenicity of new generation vaccines, especially those based on recombinant proteins. Despite immunostimulatory properties, the use of bacterial lipopolysaccharide (LPS) as an adjuvant has been hampered due to its toxicity and pyrogenicity. Brucella abortus LPS is less toxic and has no pyrogenic properties compared to LPS from other gram negati...
متن کاملSteady electrodiffusion in hydrogel-colloid composites: macroscale properties from microscale electrokinetics.
A rigorous microscale electrokinetic model for hydrogel-colloid composites is adopted to compute macroscale profiles of electrolyte concentration, electrostatic potential, and hydrostatic pressure across membranes that separate electrolytes with different concentrations. The membranes are uncharged polymeric hydrogels in which charged spherical colloidal particles are immobilized and randomly d...
متن کامل