Humidity Sensitivity and Coil Design of a High - Precision Eddy - Current Displacement Sensor †
نویسندگان
چکیده
Unlike capacitive displacement sensors, Eddy-Current Displacement Sensors (ECDSs) possess an inherently low sensitivity to environmental conditions, such as the humidity of the ambient air. By elevating the excitation frequency it is possible to mitigate their major limitations regarding stability and resolution, making them of interest for high-precision displacement sensing. However, by increasing the excitation frequency, ECDSs become less immune to environmental conditions, due to the inevitable parasitic capacitance of the sensing coil. In this work, we formulate a requirement for the minimum Self-Resonance Frequency (SRF) of the coil, based on the specified humidity variation and the allowable displacement error. This requirement provides an input for the design of the high-precision ECDS probe.
منابع مشابه
Quantitative measuring of pearlite in carbon steels using electromagnetic sensor
Non-destructive Eddy current (EC) technique has long been used to detect discontinuities in materials. Recently, its application has been extended to characterize materials microstructure. In order to identify different microstructures, four plain carbon steel bars with different chemical compositions (AISI 1015, 1035, 1045 and 1080) were used in annealed condition. The pearlite percentage, car...
متن کاملSpatial detection of ferromagnetic wires using GMR sensor and based on shape induced anisotropy
The purpose of this paper is to introduce a new technique for row spacing measurement in a wire array using giant magnetoresistive (GMR) sensor. The self-rectifying property of the GMR-based probes leads to accurately detection of the magnetic field fluctuations caused by surface-breaking cracks in conductive materials, shape-induced magnetic anisotropy, etc. The ability to manufacture probes h...
متن کاملDesign of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملHigh-Precision Internal Diameter Measurements Using Eddy Current Arrays
Tubular components subjected to extreme pressure and intense wear, requiring highprecision internal-diameter measurements, were investigated. Such measurements are currently carried out using slow mechanical devices and/or costly laboratory equipment. This paper describes the development process of a new measurement tool, capable of +/0.015mm diameter evaluation, using state-of-the-art eddy cur...
متن کاملEddy-current non-inertial displacement sensing for underwater infrasound measurements.
A non-inertial sensing approach for an Acoustic Vector Sensor (AVS), which utilizes eddy-current displacement sensors and operates well at Ultra-Low Frequencies (ULF), is described here. In the past, most ULF measurements (from mHertz to approximately 10 Hertz) have been conducted using heavy geophones or seismometers that must be installed on the seafloor; these sensors are not suitable for wa...
متن کامل