FAULT OBSERVABILITY IN DISTRIBUTED POWER SYSTEM A Thesis

نویسندگان

  • Hamidreza Nazaripouya
  • Shahab Mehraeen
  • Leszek Czarnecki
  • Mike McAnelly
چکیده

ACKNOWLEDGEMENTS First and foremost I would like to thank Almighty God for granting me the capability and providing me health and opportunity to finish this work. I offer my sincerest gratitude to my supervisor, Dr. Shahab Mehraeen, for the patient guidance, encouragement and advice he has provided throughout my time as his student. I consider myself very fortunate for being able to work with a very considerate and encouraging professor like him. for their acceptance of being in my committee as well as all valuable guidance and advice. I would also like to express my thanks to the Division of Electrical Engineering of Louisiana State University for providing me the opportunity to conduct my research in such an academic environment and my friends and colleagues at Louisiana State University for supporting me in both academic and social life. Above all, I wish to convey my heartfelt thanks and love towards my parents to whom I owe everything. I am forever indebted to my parents for their understanding, endless support and encouragement when it was most required.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Impact of Superconducting Fault Current Limiter Locations on Voltage Sag in Power Distribution System

In this paper, the impacts of installing superconducting fault current limiter (SFCL)in radial and loop power distribution system are evaluated to improve voltage sag in both cases of with and without distributed generations (DG). Among various SFCLs, the hybrid type with a superconducting element in parallel with a current limiting reactor (CLR) is selected. This is more effective than resisto...

متن کامل

Rcd Rules and Power Systems Observability

Power system state estimation is a process to find the bus voltage magnitudes and phase angles at every bus based on a given measurement set. The state estimation convergency is related to the sufficiency of the measurement set. Observability analysis actually tests this kind of problem and guarantees the state estimation accuracy. A new and useful algorithm is proposed and applied in this pape...

متن کامل

Influence of Fault Current Limiter in Voltage Drop and TRV Considering Wind Farm

Influence of distributed generation systems in the distribution systems can increase the level of short-circuit current. The effectiveness of distributed generation systems is affected by the size, location, type of distributed generation systems technology, and the methods of connecting to distribution systems. Wind turbine system is the examples of distributed generation source. Not only does...

متن کامل

Transient Stability Enhancement in Microgrids Including Inverter Interfaced Distributed Generations

With increasing the presence of Microgrids (MGs) in the power systems, investigating the MG stability during transient faults is necessary. This study investigates the transient stability analysis of a MG supplied by multiple inverter interfaced distributed generations (IIDGs) during fault. The transient stability of a MG is highly depends on the IIDGs control strategy. A MG, simulated on Matla...

متن کامل

Reconfiguration and optimal placement of distributed generations in distribution networks in the presence of remote voltage controlled bus using exchange market algorithm

Abstract: Since distribution networks have a large share of the losses in power systems, reducing losses in these networks is one of the key issues in reducing the costs of global networks, including issues Which has always been considered. In this thesis, the reconfiguration of the distribution network in the presence of distributed generation sources (DGs) with respect to two types of bus, P ...

متن کامل

Using status messages in the distributed test architecture

If the system under test has multiple interfaces/ports and these are physically distributed then in testing we place a tester at each port. If these testers cannot directly communicate with one another and there is no global clock then we are testing in the distributed test architecture. If the distributed test architecture is used then there may be input sequences that cannot be applied in tes...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013