3D fluidic lens shaping--a multiconvex hydrodynamically adjustable optofluidic microlens.
نویسندگان
چکیده
Novel optical techniques for sensitive and reproducible fluorescence single cell analysis utilizing setups without single photon counting units are attractive for enhanced low-cost cell parameter screening. In this contribution we present the first microfluidic planar device to form an optofluidic adjustable convex lens with three-dimensional light focusing ability to improve optical sensor systems.
منابع مشابه
Hydrodynamically tunable optofluidic cylindrical microlens.
In this work, we report the design, fabrication, and characterization of a tunable optofluidic microlens that focuses light within a microfluidic device. The microlens is generated by the interface of two co-injected miscible fluids of different refractive indices, a 5 M CaCl(2) solution (n(D) = 1.445) and deionized (DI) water (n(D) = 1.335). When the liquids flow through a 90-degree curve in a...
متن کاملHydrodynamically reconfigurable optofluidic microlens with continuous shape tuning from biconvex to biconcave.
This paper presents an in-plane hydrodynamically reconfigurable optofluidic microlens, which is formed by the laminar flow of two streams of a low-refractive-index fluid and two streams of a high-refractive-index fluid in the two microchannels connecting to an expansion chamber where the microlens finally forms. In the expansion chamber, the stream of high-refractive-index fluid, acting as core...
متن کاملA Tunable Fluidic Microlens with Fluorescence Enhancement
This paper reports an enhancement in fluorescence detection via the formation of fluidic microlens in micro-optical fluidic system (MOFS). The fluidic microlens is formed by three laminar flows in the expansion chamber. By changing the flow rate of each flow, the shape and focal length of the fluidic lens will be changed. Therefore, the fluidic microlens provides a wide range of tunability to e...
متن کاملOptofluidic Elements for On-Chip Sample Analysis
The benefits of the integration of novel optofluidic elements, e.g., fluidic lenses and liquid-core / liquid-cladding (L2) waveguides, for on-chip optical sample analysis are discussed. Using properly designed microfluidic channels, pre-calculated flow rate ratios and transparent fluids with different refractive indices but similar viscosity novel fluidic optical elements can be created. In thi...
متن کاملOptofluidic fabrication for 3D-shaped particles
Complex three-dimensional (3D)-shaped particles could play unique roles in biotechnology, structural mechanics and self-assembly. Current methods of fabricating 3D-shaped particles such as 3D printing, injection moulding or photolithography are limited because of low-resolution, low-throughput or complicated/expensive procedures. Here, we present a novel method called optofluidic fabrication fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Lab on a chip
دوره 9 8 شماره
صفحات -
تاریخ انتشار 2009