Processing Effects on Residual Stress
نویسنده
چکیده
The goal of this paper is to address three key questions. First, what are residual stresses? Second, what causes them? And third, are they good or bad in terms of performance of springs? The first question will be addressed by beginning with some rudimentary definitions and discussion. The second will be addressed with a process-by-process evaluation of spring manufacturing. Each process will be evaluated for its contribution to the final product’s residual stress state. The third question will be an expansion of the second, linking the process-induced residual stresses to the applied stresses and drawing conclusions as to whether performance will be enhanced or degraded for various types of springs.
منابع مشابه
Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method
In this study, thin layers of titanium nitride (TiN) were deposited on H13 steel substrates at different duty cycles and temperature of 520 ˚C using plasma assisted chemical vapor deposition (PACVD). Uniaxial residual stress was calculated by X-ray diffraction (XRD) and Sin2 Ψ method. Then the residual stress of the samples were measured by Grazing Incidence X-ray Diffraction (GIXRD) method and...
متن کاملEffects of the Residual Stress and Bias Voltage on the Phase Diagram and Frequency Response of a Capacitive Micro-Structure
In this paper, static and dynamic behavior of a varactor of a micro-phase shifter under DC, step DC and AC voltages and effects of the residual stress on the phase diagram have been studied. By presenting a mathematical modeling, Galerkin-based step by step linearization method (SSLM) and Galerkin-based reduced order model have been used to solve the governing static and dynamic equations, resp...
متن کاملExperimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings
Thermally sprayed coatings are intrinsically associated with residual stresses in the deposits. These stresses are varied in nature and magnitude, and have a pronounced effect on the mechanical behavior of the system. In the current study, WC-12Co coatings were deposited using HVOF thermal spraying. The sin2ψ method was used to evaluate the through thickness residual stress by means ...
متن کاملEffects of simulation parameters on residual stresses for laser shock peening finite element analysis
By using finite element analysis, we proposed an applicable finite element method of laser shock peening (LSP) and discussed various parameters, such as solution time, stability limit, dynamic yield stress, peak pressure, pressure pulse duration, laser spot size, and multiple LSP. The effects of parameters related to the finite element simulation of the LSP process on the residual stresses of 3...
متن کاملInvestigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
Although a few models have been proposed for 3D simulation of different welding processes, 2D models are still more effective in design goals, thus more popular due to the short-time analysis. In this research, replacing "time" by the "third dimension of place", the gas tungsten arc welding process was simulated by the finite element method in two dimensions and in a short time with acceptable ...
متن کاملFrequency Response Analysis of a Capacitive Micro-beam Resonator Considering Residual and Axial Stresses and Temperature Changes Effects
This paper presents a study on the frequency response of a capacitive micro-beam resonator under various applied stresses. The governing equation whose solution holds the answer to all our questions about the mechanical behavior is the nonlinear electrostatic equation. Due to the nonlinearity and complexity of the derived equation analytical solution are not generally available; therefore, the ...
متن کامل