Conventional wire scanners for TESLA
نویسنده
چکیده
منابع مشابه
High Field MRI: What Are the Special Safety Risks at Higher Fields?
Introduction In the last 10 years the use of MR-scanners with a magnetic field stronger than 3 Tesla (“Ultra-high field MRI”, ie. UHF-MRI, defined as 7 9.4 Tesla in this presentation) has increased sharply, mainly driven by the fact that the three main manufacturers decided to develop 7Tesla MRI scanners for research purposes. More recently, also human 9.4 Tesla research MRI scanners are offere...
متن کاملMR imaging of the neonatal brain at 3 Tesla.
3 Telsa MR scanners are now becoming more widely available and 3 Telsa is likely to become the filed strength of choice for clinical imaging of the brain. The neonatal brain can be safely and successfully imaged at 3 Telsa. The improved signal to noise afforded by a higher field strength may be used to improve image quality or shorten acquisition times. This may be exploited for conventional T1...
متن کامل[Standardization of the quantification of iron concentration in the liver by magnetic resonance imaging].
OBJECTIVE To calibrate 1.5 tesla magnetic resonance scanners for the quantification of the concentration of iron in the liver. MATERIAL AND METHODS We analyzed twenty-eight 1.5 tesla magnetic resonance scanners using a phantom with four tubes containing different concentrations of iron (III) chloride and one tube without iron. The phantom represented two typical patients: one with moderate ir...
متن کاملImproved image contrast and scan efficiency for fat suppressed T1-weighted imaging at 3T with a spin echo two-point Dixon technique
Introduction: Fat suppressed T1-weighted imaging is often an essential component of a clinical MRI exam. Compared to several relatively newer pulse sequences (e.g., spoiled gradient echo, T1FLAIR, FSE), the conventional spin echo (SE) sequence still produces the best T1-contrast and is preferred by many radiologists for certain applications (such as for imaging of head & neck). However, inclusi...
متن کاملWire Scanners for Small Emittance Beam Measurement in Atf
The wire scanners are used for a measurement of the very small beam size and the emittance in Accelerator Test Facility (ATF). They are installed in the extraction beam line of ATF damping ring. The extracted beam emittance are εx=1.3x10 m.rad, εy=1.7x10 m.rad with 2x10 electrons/bunch intensity and 1.3GeV energy[1]. The wire scanners scan the beam by a tungsten wire with beam repetition 0.78Hz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000