Multiport Circular Polarized RFID-Tag Antenna for UHF Sensor Applications

نویسندگان

  • Jamal Zaid
  • Abdulhadi Abdulhadi
  • Arun Kesavan
  • Yassin Belaizi
  • Tayeb A. Denidni
چکیده

A circular polarized patch antenna for UHF RFID tag-based sensor applications is presented, with the circular polarization (CP) generated by a new antenna shape, an asymmetric stars shaped slotted microstrip patch antenna (CP-ASSSMP). Four stars etched on the patch allow the antenna's size to be reduced by close to 20%. The proposed antenna is matched with two RFID chips via inductive-loop matching. The first chip is connected to a resistive sensor and acts as a sensor node, and the second is used as a reference node. The proposed antenna is used for two targets, serving as both reference and sensor simultaneously, thereby eliminating the need for a second antenna. Its reader can read the RFID chips at any orientation of the tag due to the CP. The measured reading range is about 25 m with mismatch polarization. The operating frequency band is 902-929 MHz for the two ports, which is covered by the US RFID band, and the axial-ratio bandwidth is about 7 MHz. In addition, the reader can also detect temperature, based on the minimum difference in the power required by the reference and sensor.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Circularly Polarized Tag Antenna for UHF RFID

Design of a circularly polarized tag antenna for UHF RFID applications is discussed and a planar tag antenna, based on series connected loop topology is designed. Simulation based design process for axial ratio optimization is discussed and the simulation and measurement results for the proposed tag antenna are presented.

متن کامل

14 Circularly Polarized Slotted / Slit - Microstrip Patch Antennas

In modern wireless communication systems, small circularly polarized microstrip antennas with good performance are desirable mainly at low microwave frequencies. The radio frequency identification (RFID) systems in the ultra-high frequency (UHF) band have gained much interest in many services [Finkenzeller2004]. The reader antenna is one of the important components in the RFID reader system and...

متن کامل

Dual-band RFID tag antenna based on the Hilbert-curve fractal for HF and UHF applications

A novel single-radiator card-type tag is proposed which is constructed using a series Hilbert-curve loop and matched stub for high frequency (HF)/ultra high frequency (UHF) dual-band radio frequency identification (RFID) positioning applications. This is achieved by merging the series Hilbert-curve for implementing the HF coil antenna, and square loop structure for implementing the UHF antenna ...

متن کامل

Compact Microstrip Antenna for RFID Application

Asymmetric-circular shaped slotted microstrip patch antennas with slits are proposed for circularly polarized(CP) radiation and radio frequency identification reader applications. A single-feed configuration based asymmetric-circular shaped slotted square microstrip patches are adopted to realize the compact circularly polarized microstrip antenna. The CP radiation can be achieved by slightly a...

متن کامل

Circularly Polarized Broadband RFID Microstrip Tag Antenna

In recent years, the application of radio frequency identification (RFID) operating in the ultra-high frequency (UHF) band (860-960MHz) are expanding exponentially, due to the advantages such as long reading distance, high data transfer rate, and small tag size. So the design of a CP tag antenna with broadband characteristic is presently one of the most challenging topics. This project presents...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 17  شماره 

صفحات  -

تاریخ انتشار 2017