Overview of the Lebedev Method for FDTD Modelling of Anisotropic Materials
نویسندگان
چکیده
A summary of the Lebedev finite-difference timedomain method, which is designed for modelling anisotropic problems in a simple and accurate manner, is provided. The basics of the method are presented, as well as augmentations to allow for coupling the Lebedev grid to standard Yee grid for more efficient use of memory; and implementation of conducting surfaces, and corners of 90◦ or 270◦.
منابع مشابه
The Finite - Di erence Time - Domain MethodApplied to Anisotropic
The Finite-Diierence Time Domain (FDTD) method has received considerable attention recently. The popularity of the FDTD method stems from the fact that it is not limited to a speciic geometry and it does not restrict the constitutive parameters of a scatterer. Furthermore, it provides a direct solution to problems with transient illumination, but can also be used for harmonic analysis. However,...
متن کاملمقایسه نتایج شبیهسازی بلور فوتونی با استفاده از روش FDTD دوبعدی بهبودیافته و FDTD سهبعدی
The accuracy of improved two dimensional finite difference time domain method (2D FDTD) is verified by comparing with 3D FDTD method and experimental data. The optimized 60° photonic crystal waveguide bend, used in this study as a test case, is composed of InPGaAs/InP material and air holes and TE polarization is considered. The photonic crystal waveguide bend transmission data was measured...
متن کاملModelling Mechanical Properties of AISI 439-430Ti Ferritic Stainless Steel Sheet
The comprehension of the anisotropy impacts on mechanical properties of the rolled steel sheets was investigated using a non-quadratic anisotropic yield function. In this study, experimental and modelling determination regarding the behaviour of an industrial rolled sheet for a ferritic stainless low-carbon steel were carried out. The parameters of the associated yield equation, derived from th...
متن کاملFinite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
Pyroplastic deformation is a distortion of the ceramic shape during the sintering process. It occurs because the flow of the vitreous phase at high temperature and the applied stress due to the weight of the product during sintering process. The aim of this paper deals with describing a numerical-experimental method to evaluate the pyroplastic deformation, to predict the anisotropic shrinkage a...
متن کاملDeployment of Interpretive Structural Modelling Methodology in Supply Chain Management –An overview
Abstract Purpose-The purpose of this paper is to review a sample of the literature relating to Interpretive Structural Modelling (ISM) and its deployment for modelling purposes in the area of supply chain management (SCM). Design/methodology/approach- The literature is examined from the three perspectives. First, concept of ISM and examines ISM as modelling technique. Second, use of ISM by ...
متن کامل