Pii: S0921-5093(00)01382-4
نویسندگان
چکیده
Reconstituted nanostructured powders were plasma sprayed using various processing conditions to produce nanostructured alumina–titania coatings. Properties of the nanostructured coatings were related to processing conditions through a critical plasma spray parameter (CPSP) that in turn, can be related to the amount of unmelted powder incorporated into the final coating. Those coatings that retain a significant amount of unmelted powder show optimum microstructure and properties. Selected physical and mechanical properties were evaluated by X-ray diffraction (XRD), optical and electron microscopy, quantitative image analysis and mechanical testing. Constituent phases and the microstructure of the reconstituted particles and plasma sprayed coatings were examined with the aid of quantitative image analysis as a function of processing conditions. Mechanical properties including hardness, indentation crack growth resistance, adhesion strength, spallation resistance during bendand cup-tests, abrasive wear resistance and sliding wear resistance were also evaluated. These properties were compared with a commercial plasma sprayed alumina–titania coating with similar composition. Superior properties were demonstrated for nanostructured alumina–titania coatings plasma sprayed at optimum processing conditions. © 2001 Elsevier Science B.V. All rights reserved.
منابع مشابه
Pii: S0921-5093(00)00996-5
This work investigates phase change phenomena due to high power pulsed laser irradiation. During high power laser heating, the intense radiation flux from the laser is transformed to the target material and raises the temperature of the target surface rapidly. When the laser fluence is high enough, melting and superheating of liquid are possible. At even higher laser fluences, the superheated l...
متن کاملPii: S0921-5093(00)00999-0
Solid-state energy conversion technologies such as thermoelectric and thermionic refrigeration and power generation require materials with low thermal conductivity but good electrical conductivity, which are difficult to realize in bulk semiconductors. Nanostructures such as quantum wires and quantum wells provide alternative approaches to improve the solid-state energy conversion efficiency th...
متن کاملPii: S0921-5093(00)00906-0
Under certain conditions, hydrogen can degrade the mechanical properties and fracture behavior of most structural alloys; however, it also has some positive effects in metals. Several current and potential applications of hydrogen for enhancing the production and processing of materials are reviewed. These include thermohydrogen processing (THP) and forming of refractory alloys, processing of r...
متن کاملPii: S0921-5093(00)01781-0
Creep experiments were performed on dispersion-strengthened-cast magnesium (DSC-Mg), consisting of unalloyed magnesium with 1 mm grain size containing 30 vol.% of 0.33 mm yttria particles. Strain rates were measured for temperatures between 573 and 723 K at compressive stresses between 7 and 125 MPa. DSC-Mg exhibits outstanding creep strength as compared with other magnesium materials, but is l...
متن کامل