Chemical Vapor Generation with Slurry Sampling: a Review of Atomic Absorption Applications
نویسنده
چکیده
This review summarizes and discusses the analytical methods and techniques described in the literature for hydride generation as a mode of slurry sample introduction into atomization cells. A brief comparison of detection limits for analytical atomic absorption methods and practical applications to analytical samples that utilize slurry hydride generation is discussed. The current state-of-the-art, including advantages and limitations of this approach is discussed.
منابع مشابه
Determination of bismuth in environmental samples by slurry sampling graphite furnace atomic absorption spectrometry using combined chemical modifiers
Slurry sampling graphite furnace atomic absorption spectrometry technique was applied for the determination of Bi in environmental samples. The study focused on the effect of Zr, Ti, Nb and W carbides, as permanent modifiers, on the Bi signal. Because of its highest thermal and chemical stability and ability to substantially increase Bi signal, NbC was chosen as the most effective modifier. The...
متن کاملTraces of cadmium in human scalp hair measured by electrothermal atomic absorption spectrometry with the slurry sampling technique.
Traces of Cadmium in Human Scalp Hair Measured by Electrothermal Atomic Absorption Spectrometry with the Slurry Sampling Technique, Pilar Bermejo-Barrera, * Antonio Moreda-Pi#{241}eiro,Teresa Romero-Barbeito, Jorge Moreda-Pi#{241}eiro, and Adela Bermejo-Barrera (Dept. of Anal. Chem., Nutrition, and Bromatob., Faculty of Chem., Univ. of Santiago de Composteba, Av. das Ciencias s/n, E 15706 Santi...
متن کاملDetermination of Metal Loading in Heterogeneous Catalyst by Slurry Sampling Flame Atomic Absorption Spectrometry
Quantification of metal loading in supported catalysts is imperative; however, the analytical methods are usually time-consuming, expensive, and require sophisticated equipment and sample extraction with hazardous and corrosive strong acids. Herein, we report a new method for quantification of metal in supported catalysts using slurry sampling flame atomic absorption spectrometry. The slurry sa...
متن کاملاستفاده از نانو ذرات نقره برای نمونه برداری از بخارات سمی جیوه از هوای محیط های صنعتی
Introduction: Mercury is one of the toxic metals that damages the nervous system and kidneys. Therefore, monitoring of mercury vapors in the environments is essential. .Material and Method: A new adsorbent was made from silver nanoparticles on a bed of quartz. The nano-adsorbent was capable for sampling of the trace amounts of mercury vapor from air. In this study, the required mercury vapor ...
متن کاملDetermination of methylmercury and inorganic mercury in water samples by slurry sampling cold vapor atomic absorption spectrometry in a flow injection system after preconcentration on silica C(18) modified.
A novel method for preconcentration of methylmercury and inorganic mercury from water samples was developed involving the determination of ngl(-1) levels of analytes retained on the silica C(18) solid sorbent, previous complexation with ammonium pyrrolidine dithiocarbamate (APDC), by slurry sampling cold vapor atomic absorption spectrometry (SS-CVAAS) in a flow injection (FI) system. Several va...
متن کامل