DSP-based New On-line Dead Time Compensation Strategy of a PMSM Drive through Digital Signal Processing and Harmonic Component Extraction for a Robot Arm Application
نویسندگان
چکیده
Abstract DSP-based on-line dead time compensation strategy of a permanent magnet synchronous motor (PMSM) drive through a signal processing and harmonic extraction for a robot arm application is proposed. The proposed scheme is based on monitoring the fifth-order harmonic component through the signal processing and harmonic component extraction. The proposed scheme does not require a periodic information of current for the harmonic calculation nor parameter information. Also, it gives a faster estimation performance than the conventional harmonic approach. The effectiveness of the proposed scheme is verified through the comparative simulations and experiments using DSP TMS320F28335.
منابع مشابه
Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کاملA New Adaptive Self-Tuning Fourier Coefficients Algorithm for Periodic Torque Ripple Minimization in Permanent Magnet Synchronous Motors (PMSM)
A New Adaptive Self-Tuning Fourier Coefficients Algorithm for Periodic Torque Ripple Minimization in Permanent Magnet Synchronous Motors (PMSM) Torque ripple occurs in Permanent Magnet Synchronous Motors (PMSMs) due to the non-sinusoidal flux density distribution around the air-gap and variable magnetic reluctance of the air-gap due to the stator slots distribution. These torque ripples change ...
متن کاملDesign and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملOn-line dead-time compensation method based on time delay control
In this work, an on-line dead-time compensation method based on a time delay control for a pulse-modulation (PM) synchronous motor drive is presented. Disturbance voltages caused by the dead time are estimated on-line without any additional circuits nor off-line experimental measurements. The estimated disturbance voltages are fed back to the voltage reference as compensation. The proposed meth...
متن کاملImplementation and Critical Investigation on Modulation Schemes of Three Phase Impedance Source Inverter
New control circuits and algorithms are frequently proposed to control the impedance (Z) source inverter in efficient way with added benefits. As a result, several modified control techniques have been proposed in recent years. Although these techniques are clearly superior to the simple boost control method which was initially proposed along with the Z-source inverter (ZSI), little or conf...
متن کامل