Direct synthesis of B-C-N single-walled nanotubes by bias-assisted hot filament chemical vapor deposition.

نویسندگان

  • W L Wang
  • X D Bai
  • K H Liu
  • Z Xu
  • D Golberg
  • Y Bando
  • E G Wang
چکیده

Direct synthesis of large-scale ternary boron carbonitride single-walled nanotubes (BCN-SWNTs) via a bias-assisted HFCVD process was presented. The BCN-SWNTs were grown over the powdery Fe-Mo/MgO catalyst by using CH4, B2H6, and ethylenediamine vapor as the reactant gases. As high as 16 atom % nitrogen can be incorporated within the nanotube shells, with the boron content in the range of 2-4 atom %. The ternary covalent bonding nature of the BCN-SWNTs was well characterized, and the B, C, and N elemental maps were clearly imaged by energy-filtered transmission electron microscopy.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thin Solid Films High-quality Single-walled Carbon Nanotubes Synthesis by Hot Filament Cvd on Ru Nanoparticle Catalyst

We investigated the single-walled carbon nanotubes (SWCNTs) growth on Ru nanoparticle catalyst via hot filament assisted chemical vapor deposition (HFCVD) with two independent W filaments for the carbon precursor (methane) and the hydrogen dissociation respectively. The Ru nanoparticles were obtained following a two-step strategy. At first the growth substrate is functionalized by silanisation,...

متن کامل

Investigation of Optimal Parameters for Oxide-Assisted Growth of Vertically Aligned Single-Walled Carbon Nanotubes

An investigation into the optimal growth of single-walled carbon nanotubes (SWNTs) in vertical arrays, or carpets, is presented utilizing atomic hydrogen catalyst activation with hot filament chemical vapor deposition. Using acetylene decomposition over Fe catalyst, we study the effect of oxidant-assisted growth using O2, CO2, and H2O. Whereas trace amounts of O2 result in the lack of any catal...

متن کامل

Direct synthesis of single-walled carbon nanotubes bridging metal electrodes by laser-assisted chemical vapor deposition

Direct synthesis of single-walled carbon nanotubes SWNTs bridging prepatterned Mo electrodes has been achieved using laser-assisted chemical vapor deposition LCVD . The synthesized SWNTs are found predominantly semiconducting. By controlling the spot size of the focused laser beam, synthesis of SWNTs can be achieved in a localized manner, which is governed by the thermal and optical properties ...

متن کامل

Synthesis of multi-walled carbon nanotubes by combining hot-wire and dc plasma-enhanced chemical vapor deposition

Multi-walled carbon nanotubes (MWCNTs) have been grown on 7 nm Ni-coated substrates consisting of crystalline silicon covered with a thin layer (10 nm) of TiN, by combining hot-wire chemical vapor deposition (HWCVD) and direct current plasma-enhanced chemical vapor deposition (dc PECVD), at 620 -C. Acetylene (C2H2) gas is used as the carbon source and ammonia (NH3) and hydrogen (H2) are used ei...

متن کامل

Vertical array growth of small diameter single-walled carbon nanotubes.

A hot filament chemical vapor deposition method has been developed to grow vertical array single-walled carbon nanotubes (SWNTs). In this study, a hot filament (temperature greater than 2000 degrees C) was used to activate gas mixtures of hydrogen and carbon containing species at sub-atmospheric pressures. Silicon substrates decorated with islands of iron were directly inserted into a preheated...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American Chemical Society

دوره 128 20  شماره 

صفحات  -

تاریخ انتشار 2006