Design, Construction and Control of a Remotely Operated Vehicle (rov)

Alireza Marzbanrad Shiraz University,School of Mechanical Engineering Shiraz, Iran Jalil Sharafi K. N. Toosi University of Technology, Department of Systems and Control Tehran, Iran Mohammad Eghtesad Shiraz University,School of Mechanical Engineering Shiraz, Iran Reza Kamali Shiraz University,School of Mechanical Engineering Shiraz, Iran ABSTRACT This is report of design, construction and control of “ArianaI”, an Underwater Remotely Operated Vehicle (ROV), built in Shiraz University Robotic Lab. This ROV is equipped with roll, pitch, heading, and depth sensors which provide sufficient feedback signals to give the system six degrees-of-freedom actuation. Although its center of gravity and center of buoyancy are positioned in such a way that Ariana-I ROV is self-stabilized, but the combinations of sensors and speed controlled drivers provide more stability of the system without the operator involvement. Video vision is provided for the system with Ethernet link to the operation unit. Control commands and sensor feedbacks are transferred on RS485 bus; video signal, water leakage alarm, and battery charging wires are provided on the same multi-core cable. While simple PI controllers would improve the pitch and roll stability of the system, various control schemes can be applied for heading to track different paths. The net weight of ROV out of water is about 130kg with frame dimensions of 130×100×65cm. Ariana-I ROV is designed such that it is possible to be equipped with different tools such as mechanical arms, thanks to microprocessor based control system provided with two directional high speed communication cables for on line vision and operation unit.