1 Design of Microstrip Patch Antenna Using Slotted Partial Ground And Addition Of Stairs And Stubs For UWB Application
نویسندگان
چکیده
This paper presents the design with optimum geometry of a novel UWB rectangular patch antenna. A simple narrowband patch antenna is designed before proceeding to the geometry of UWB antenna. A special configuration of patch antenna with slotted partial ground and addition of stairs and stubs was designed and optimized using CST Microwave Studio (CSTMWS). The designed antenna was fabricated, tested and compared with the simulation results. The proposed antenna’s characteristics were investigated with various options and found to operate satisfactorily. A remarkable improvement has been noticed in this design. Moreover, the antennas structure offers great advantages due to its simple designs and small dimensions.
منابع مشابه
Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDesign and Miniaturization of a Novel Fractal Microstrip Antenna for UWB Applications
A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملCompact Wideband Rectangular Monopole Antenna for Wireless Applications
This article presents a compact wideband microstrip-fed planar monopole antenna composed of a rectangular patch and slotted ground structure. By placing pair of symmetrical square stubs, making slots in the stubs, putting stubs on the sides of the radiating patch, gives wide-band characteristics. The antenna only one of its kinds in structure, small in size and simple design due to less number ...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کامل