3.5-3.8GHz class-E balanced GaN HEMT power amplifier with 20W Pout and 80% PAE
نویسندگان
چکیده
In this study, balanced and single ended class-E power amplifiers (PAs) were designed and realized for 3.5–3.8GHz band by using Gallium Nitride high electron mobility transistor (GaN HEMT). Realizations were made on low loss Rogers RT5880 dielectric material which has 0.254mm thickness and 2.2 dielectric constant. Proposed balanced class-E PA has approximately 20W (43 dBm) output power with 80% peak power added efficiency (PAE) and shows a very favorable combination of output power, PAE and suppressed even order harmonics compared to the single ended class-E PA prototype.
منابع مشابه
Design of X Band High Power Amplifier MMIC Based on AlGaN/GaN HEMT
In this paper, we have presented an X band high power amplifier based on MMIC (Monolithic Microwave Integrated Circuit) technology for satellite remote sensing systems. We have used GaN HEMT process with 500 nm gate length technology with VD= 40 V and VG= -2 V in class E structure. The proposed two-stage power amplifier provides 25 dB power gain with maximum output power of 49.3 dBm at 10 GHz. ...
متن کاملHighly efficient 2.7-2.9GHz class-F and inverse class-F power amplifiers in GaN HEMT technology
In this letter, novel class-F and inverse class-F power amplifier (PA) topologies were proposed, simulated, realized and measured for 2.7–2.9GHz frequency band by using Gallium Nitride high electron mobility transistor (GaN HEMT). Realizations are made on Rogers TMM3 dielectric material which has 0.381mm thickness and 3.27 dielectric constant. Proposed class-F and inverse class-F PAs have 10W (...
متن کاملMMIC class-F power amplifiers using field-plated GaN HEMTs
Abstract: Class-F microwave monolithic integrated circuit (MMIC) power amplifiers (PA) fabricated in a GaN technology are reported. Field-plated GaN HEMT devices are used for highpower performance. Two MMICs are reported. The first class-F MMIC PA operating at 2.0GHz achieved a power-added efficiency (PAE) of 50% with 38dBm output power and 6.2W/mm power density. A second class-F PA operating a...
متن کاملatedA GaN/GaN HEMTs
Two simple class-F NVI1VIIC power amplifiers are described using 0.7tm field-plated GaN HEMT devices. One circuit was designed for operation at 2.0 GHz and achieved a power-added-efficiency of 50%, 38 dBm output power, and 6.2 W/mm power density. A second circuit was designed at 2.8 GHz and achieved a PAE of 46% with 37 dBm output power and 7.0 W/mm power density.
متن کاملNovel Approach to Design of a Class-EJ Power Amplifier Using High Power Technology
This article proposes a new method for application in communication circuit systems that increase efficiency, PAE, output power and gain in the circuit. The proposed method is based on a combination of switching class-E and class-J and has been termed class-EJ. This method was investigated using both theory and simulation to confirm ∼72% PAE and output power of >39dBm. The combination and desig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Electronic Express
دوره 10 شماره
صفحات -
تاریخ انتشار 2013