Mathematical modelling of compressible viscous fluid flow in a male rotor-housing gap of screw machines
نویسنده
چکیده
This contribution is devoted to the mathematical modelling of a compressible viscous fluid flow through a 2-D model of the male rotor-housing gap in screw machines. Numerical solution of the nonlinear conservative system of the compressible Navier-Stokes equations is obtained by means of the cell-centred finite volume formulation of the explicit two-step TVD MacCormack scheme proposed by Causon on a structured quadrilateral grid using the own developed numerical code.
منابع مشابه
Heat Transfer in Three-Dimensional Flow along a Porous Plate
An analysis of heat transfer in the flow of a viscous, in-compressible fluid along an infinite porous plate is presented when the plate is subjected to a transverse sinusoidal suction. The flow field becomes three-dimensional due to this type of suction velocity. Expressions for the flow and temperature fields are obtained by series expansion method. It is found during the course of discussion ...
متن کاملHALL AND LON-SLIP EFFECTS ON MAGNETO-MICROPOLAR FLUID WITH COMBINED FORCED AND FREE CONVECTION IN BOUNDARY LAYER FLOW OVER A HORIZONTAL PLATE WITH VISCOUS DISSIPATION
In this paper, we study the effects of Hall and ion-slip currents on the steady magneto-micropolar of a viscous incompressible and electrically conducting fluid over a horizontal plate by taking in to account the viscous dissipation effects. By means of similarity solutions, deviation of fundamental equations on the assumption of small magnetic Reynolds number are solved numerically by using qu...
متن کاملMATHEMATICAL MODELLING OF THE EFFECT OF FOAM DEGRADATION ON MOULD FILLING IN THE GREY IRON EPC PROCESS
In this investigation a new model was developed to calculate gas pressure at the melt/foam interface (Gap) resulting from foam degradation during mould filling in the Lost Foam Casting (LFC) process. Different aspects of the process, such as foam degradation, gas elimination, transient mass, heat transfer, and permeability of the refractory coating were incorporated into this model. A Computati...
متن کاملAspects of Two-Phase Flow Screw Compressor Modelling Part I: Leakage Flow and Rotor Tip Friction
A one-dimensional leakage flow model for two-phase ammonia-water twin screw compressors is presented. The model takes into account viscous and acceleration forces and is based on three conservation equations and on the equation of state for homogenous NHiH20 mixture. The governing equations are solved with a finite difference method. Numerical shooting is used to find such inlet flow velocity a...
متن کاملCFD Analysis of Oil Flooded Twin Screw Compressors
Modelling of screw compressors using Computational Fluid Dynamics (CFD) offers better insight into the working chamber of twin screw machines when compared with chamber models. As shown by authors in earlier publications, CFD models predict performance of dry gas and refrigeration compressors fairly accurately. However numerical flow models used for modelling of oil flooded twin screw compresso...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004