Higher-order model of electromagnetic valve for control of liquid flow
نویسندگان
چکیده
An electromagnetic valve for control of flow of electrically non-conductive liquids is proposed and modeled. The device contains only one movable part (a cylindrical plunger) whose movement is controlled by a secondary magnetic circuit with a highparameter permanent magnet and current in the field coil. The paper presents its mathematical model that is solved numerically. For computations we used our own code Agros2D based on a fully adaptive higher-order finite element method. The static characteristics of the device are calculated using a modified version of the Eggshell method in order to avoid undesirable peaks and oscillations. The principal results are evaluated and discussed.
منابع مشابه
Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application
Engines equipped with camless valve trains will have greater space for performance optimization. In this paper, based on the electromagnetic actuated valve train system, one-dimensional and three-dimensional simulation models on engine thermodynamic cycle and in-cylinder charge motion are established, respectively. With the application of early-intake-valve closing (EIVC) strategy，unthrottled l...
متن کاملThe Effect of Valve Lift on In-Cylinder Flow, Performance and Emissions in a Turbocharged DI Diesel Engine
A computational optimization was performed for a direct-injection diesel engine using three-dimensional modeling. Fully transient CFD analyses of different valve profile strategies for the intake and compression strokes were performed to evaluate the effects on both engine performance and in-cylinder flow-field evolution. The turbulence model was used along with the second order linear upwin...
متن کاملSimulation and investigation of the effect of oil flow rate, electric signal of flow control valve and controller on the performance of a wet clutch
The using of wet clutches and hydraulic control devices causes a smoothly torque transfer. In this study, a wet clutch was simulated in Simulink MATLAB software. Firstly the mechanical section of the clutch was modeled and then the hydraulic section was simulated with the addition of electric flow control valve and inlet and outlet of oil flow. Finally, the effects of oil flow rate, electric s...
متن کاملمدلسازی حذف الکترومغناطیسی آخال به صورت پیوسته از مذاب فلزات
In this research, a 3-D mathematical model is developed for simulating electromagnetic continuous removal of inclusions from molten metals. The model includes the computation of electromagnetic force field and fluid flow in the presence of electromagnetic forces. The results of flow field together with electromagnetic force field were further used for calculating the trajectory of inc...
متن کاملSHEET ELECTROMAGNETIC FORMING USING CONVEX PUNCH INSTEAD OF CONVAVE DIE
High speed and absence of a precise control over pressure distribution confine sheet Electromagnetic Forming into a die to simple shapes having shallow depth. It is possible to reach a higher depth by using a convex punch instead of a concave die. In this study, sheet Electromagnetic Forming on a punch and sheet Electromagnetic Forming into a die are investigated. The electromagnetic part of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015