Influence of C60 co-deposition on the growth kinetics of diindenoperylene-From rapid roughening to layer-by-layer growth in blended organic films.
نویسندگان
چکیده
We investigated the growth of the two phase-separating materials diindenoperylene (DIP) and buckminsterfullerene C60 with different mixing ratio in real-time and in situ by X-ray scattering experiments. We found that at room temperature, mixtures with an excess of DIP show a growth mode which is very close to the perfect layer-by-layer limit with DIP crystallites forming over the entire film thickness. An unexpected increase in the island size is observed for these mixtures as a function of film thickness. On the other hand, equimolar and C60 dominated mixtures grow with poor crystallinity but form very smooth films. Additionally, it is observed that higher substrate temperatures lead to an increase in the length scale of phase separation with film thickness.
منابع مشابه
Optimized Conditions for Catalytic Chemical Vapor Deposition of Vertically Aligned Carbon Nanotubes
Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...
متن کاملSmoothing and coherent structure formation in organic-organic heterostructure growth
We use in situ real-time X-ray reflectivity and complementary atomic force microscopy to monitor crystallinity and roughness evolution during growth of organic heterostructures, i.e. perfluoropentacene (PFP) on diindenoperylene (DIP) and pentacene (PEN) on PFP. For both systems, surface smoothing during thermal evaporation of the second material on top of the first is observed. The smoothing ca...
متن کاملMechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملEvaluation of the Effect of Ni-Co NPs for the Effective Growth of Carbon Nanotubes by TCVD System
A systematic study was conducted to understand the influences of catalyst combination as Ni-Co NPs on carbon nanotubes (CNTs) grown by Chemical Vapor Deposition (TCVD). The DC-sputtering system was used to prepare Co and Ni-Co thin films on silicon substrate. Ni- Co nanoparticles were used as metal catalyst for growing carbon nanotubes from acetylene (C2H2) gas in 850 ̊ C during 15 min. Carb...
متن کاملTemplating Effects of α‐Sexithiophene in Donor−Acceptor Organic Thin Films
Small-molecule organic photovoltaic cells often employ a planar heterojunction (PHJ) geometry where the electron donor and acceptor materials are stacked one on top of the other. The thin-film growth scenario of such PHJs can be very different from the one of a single compound on a bare substrate. We have investigated the growth of PHJs, consisting of two different donor−acceptor pairs, namely,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The Journal of chemical physics
دوره 146 5 شماره
صفحات -
تاریخ انتشار 2017