Infrared surface-wave interferometry on W(100).
نویسندگان
چکیده
An IR grating on a clean W(100) surface is shown to generate both homogeneous and inhomogeneous surface electromagnetic waves. An observed interference between these two components, which can be described in terms of a two-beam interferometer with variable arm amplitude and fixed optical path, is used to measure the plasma frequency accurately in the IR.
منابع مشابه
Upgrade of far-infrared laser-based Faraday rotation measurement on MST.
Recently, the far-infrared (FIR) laser (λ(0)=432 μm) Faraday rotation measurement system on MST has been upgraded. The dc flowing-gas discharge CO(2) pump laser is replaced by a rf-excited, sealed CO(2) laser at 9.27 μm (GEM select 100, Coherent Inc., Santa Clara, CA), which is subdivided equally into three parts to simultaneously pump three FIR cavities. The total infrared pump power is approx...
متن کاملContinuous-wave 1
A room temperature operating Vertical External Cavity Surface Emitting Laser is applied around 1550 nm to intracavity laser absorption spectroscopy analyzed by timeresolved Fourier transform interferometry. At an equivalent pathlength of 15 km, the high resolution spectrum of the semiconductor disk laser emission covers 17 nm simultaneously. A noise equivalent absorption coefficient at one seco...
متن کاملNondestructive testing by using long-wave infrared interferometric techniques with CO2 lasers and microbolometer arrays.
We describe three different interferometric techniques (electronic speckle pattern interferometry, digital holographic interferometry, and digital shearography), using a long-wave infrared radiation produced by a CO(2) laser and recorded on a microbolometer array. Experimental results showing how these methods can be used for nondestructive testing are presented. Advantages and disadvantages of...
متن کاملThermal Infrared Optical Metrology using Quadri-Wave Lateral Shearing Interferometry
We present the application of Quadri-Wave Lateral Shearing Interferometry (QWLSI), a wave front sensing technique, to characterize thermal infrared lenses for wavelengths within 8 and 14μm. Wave front sensing is not only a tool to quantify optical quality, but also to map the local (dust, scratches) or global possible defects. This method offers the crucial advantage that it yields an analyzed ...
متن کاملNear-field visualization of strongly confined surface plasmon polaritons in metal-insulator-metal waveguides.
A nanoscale gap between two metal surfaces can confine propagating surface plasmon polaritons (SPPs) to very small dimensions, but this geometry makes it inherently difficult to image SPP propagation at high resolution. We demonstrate the near-field probing of these SPPs, propagating within a 50 nm thick Si 3N 4 waveguide with Ag cladding layers for frequencies ranging from the blue to the near...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics letters
دوره 11 12 شماره
صفحات -
تاریخ انتشار 1986