A Foot-Mounted Inertial Measurement Unit (IMU) Positioning Algorithm Based on Magnetic Constraint
نویسندگان
چکیده
With the development of related applications, indoor positioning techniques have been more and more widely developed. Based on Wi-Fi, Bluetooth low energy (BLE) and geomagnetism, indoor positioning techniques often rely on the physical location of fingerprint information. The focus and difficulty of establishing the fingerprint database are in obtaining a relatively accurate physical location with as little given information as possible. This paper presents a foot-mounted inertial measurement unit (IMU) positioning algorithm under the loop closure constraint based on magnetic information. It can provide relatively reliable position information without maps and geomagnetic information and provides a relatively accurate coordinate for the collection of a fingerprint database. In the experiment, the features extracted by the multi-level Fourier transform method proposed in this paper are validated and the validity of loop closure matching is tested with a RANSAC-based method. Moreover, the loop closure detection results show that the cumulative error of the trajectory processed by the graph optimization algorithm is significantly suppressed, presenting a good accuracy. The average error of the trajectory under loop closure constraint is controlled below 2.15 m.
منابع مشابه
PDR with a Foot-Mounted IMU and Ramp Detection
The localization of persons in indoor environments is nowadays an open problem. There are partial solutions based on the deployment of a network of sensors (Local Positioning Systems or LPS). Other solutions only require the installation of an inertial sensor on the person's body (Pedestrian Dead-Reckoning or PDR). PDR solutions integrate the signals coming from an Inertial Measurement Unit (IM...
متن کاملRotating a MEMS inertial Measurement Unit for a foot-mounted Pedestrian Navigation
Pedestrian navigation especially indoors suffers from the unavailability of useful GNSS signals for positioning. Alternatively, a low-cost Inertial Measurement Unit (IMU) positioning system that does not depend on the GNSS signal can be used for indoor navigation. However its performance is still compromised because of the fastaccumulating heading drift error affecting such a low-cost IMU senso...
متن کاملInertial Measurement Unit Calibration Platform
The Department of Mechanical Engineering and Avionics Engineering Center at Ohio University are developing an electromechanical system for the calibration of an inertial measurement unit (IMU) using global positioning system (GPS) antennas. The GPS antennas and IMU are mounted to a common platform to be oriented in the angular roll, pitch, and yaw motions. Vertical motion is also included to te...
متن کاملIFEN’s integrated (GNSS, foot-mounted IMU and QR codes) navigation device applied for supporting fire fighters
In the course of this paper, a by IFEN GmbH developed integrated navigation device for aiding and rescuing fire fighters in emergency situations is presented. In areas with sufficient signal strength the respective rescue force is tracked by means of GNSS/INS position information, whereas indoor or in areas without GNSS support, the positioning is conducted by means of a foot mounted inertial m...
متن کاملPedestrian Navigation Using Foot-Mounted Inertial Sensor and LIDAR
Foot-mounted inertial sensors can be used for indoor pedestrian navigation. In this paper, to improve the accuracy of pedestrian location, we propose a method using a distance sensor (LIDAR) in addition to an inertial measurement unit (IMU). The distance sensor is a time of flight range finder with 30 m measurement range (at 33.33 Hz). Using a distance sensor, walls on corridors are automatical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 18 شماره
صفحات -
تاریخ انتشار 2018