Sources and transport systems for low energy extreme of ion implantation

نویسندگان

  • A. Hershcovitch
  • V. A. Batalin
  • A. S. Bugaev
  • V. I. Gushenets
  • O. Alexeyenko
  • E. Gurkova
  • B. M. Johnson
  • A. A. Kolomiets
  • G. N. Kropachev
  • R. P. Kuibeda
  • T. V. Kulevoy
  • E. M. Oks
  • V. I. Pershin
  • H. J. Poole
  • D. N. Seleznev
  • P. A. Storozhenko
  • P. Yakushin
  • G. Yu. Yushkov
  • A. Vizir
  • A. Ya. Svarovski
چکیده

For the past seven years a joint research and development effort focusing on the design of steady state, intense ion sources has been in progress with the ultimate goal being to meet the two, energy extreme range needs of mega-electron-volt and 100’s of electron-volt ion implanters. However, since the last Fortier is low energy ion implantation, focus of the endeavor has shifted to low energy ion implantation. For boron cluster source development, we started with molecular ions of decaborane (B10H14), octadecaborane (B18H22), and presently our focus is on carborane (C2B10H12) ions developing methods for mitigating graphite deposition. Simultaneously, we are developing a pure boron ion source (without a working gas) that can form the basis for a novel, more efficient, plasma immersion source. Our Calutron-Berna ion source was converted into a universal source capable of switching between generating molecular phosphorous P4, high charge state ions, as well as other types of ions. Additionally, we have developed transport systems capable of transporting a very large variety of ion species, and simulations of a novel gasless/plasmaless ion beam deceleration method were also performed.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films

In the present study, effect of interfacial roughness on the ion implanted Tantalum based surfaces has been investigated. The argon ions with energy of 30 keV and in doses of 1×1017 , 3×1017 , 5×1017 , 7×1017 , and 10×1017  (ion/cm2) have been used at ambient temperature. The Atomic Force Microscopy (AFM), analysis have been used to study and characterize the surfaces morphology. The effect of ...

متن کامل

LOW-ENERGY-ION ENHANCED DIFFUSION AT THE SURFACE OF METALS

Radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. The displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. The mechanism has been studied here by a specia...

متن کامل

Transport System for Ion Implantation

ITEP in collaboration with MEPHI and HCEI (Tomsk) develops the high intensity ion beam generation and transport systems for low energy (1 – 50 keV) ion implantation. Such facilities are used for semiconductor technology. The Bernas type ion source is used for the ribbon ion beam production. The periodical system of electrostatic lenses (electrostatic undulator) was proposed for ribbon beam tran...

متن کامل

The Effect of Doping and the Thickness of the Layers on CIGS Solar Cell Efficiency

The main problemswith the use of fossil fuels is the restrictions on their access and the detrimental consequences of their use which causes a threat to human health and quality of life. Consequently, the use of other energy sources has become necessary. Renewable Energy as a permanent and clean energy source is an answer to this problem. One such energy source includes photovoltaic solar energ...

متن کامل

Influence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on Nano-Structure and Corrosion Behavior of 316 Stainless Steels

Nickel films of 300 nm thickness were deposited by electron beam evaporation at room temperature on 316 stainless steels. Corrosion studies of Ni coated 316 SS have been performed after N+ ion implantation at different energies of 20, 40, 60 and 80 keV. The structure and surface morphology of the films were evaluated using X-ray diffraction (XRD), atomic force microscope (AFM) an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010