Fabrication of three dimensional split ring resonators by stress-driven assembly method.
نویسندگان
چکیده
We demonstrate a self-assembly strategy for fabricating three dimensional (3D) metamaterials. This strategy represents the desired 3D curving prongs of the split ring resonators (SRRs) erected by metal stress force with appropriate thin film parameters. Transmittance spectra and field patterns corresponding to each resonance modes are calculated by finite element method (FEM). The eigen-modes of the SRRs can be excited by normal illumination with polarization state parallel to the erected SRRs, which are unlike for the cases of planar SRRs. This method opens a promising fabrication process for the application of tailored 3D SRRs.
منابع مشابه
Design and Fabrication of a Narrow-bandwidth Micromechanical Ring Filter using a Novel Process in UV-LIGA Technology
This paper presents the design and a new low-cost process for fabrication of a second-order micromechanical filter using UV-LIGA technology. The micromechanical filter consists of two identical bulk-mode ring resonators, mechanically coupled by a flexural-mode beam. A new lumped modeling approach is presented for the bulk-mode ring resonators and filter. The validity of the analytical derivatio...
متن کاملThree-dimensional movable metamaterial using electric split-ring resonators.
We have demonstrated a three-dimensional movable metamaterial (MM) with reconfigurable electric split-ring resonators (eSRR) at terahertz frequencies. This is accomplished by making planar arrays of eSRR with movable stress curved beams (eSRR-MSCBs) which are actuated out-of-plane by electrostatic force. Our results have demonstrated that the eSRR-MSCBs possess blueshifting capabilities and pol...
متن کاملDesign and Simulation 4-Channel Demultiplexer Based on Photonic Crystals Ring Resonators
In this paper, a new design of demultiplexer based on two-dimensional photonic crystal ringresonator is proposed. The structure is made of a hexagonal lattice of silicon rods with therefractive index 3.46 in coefficient of air with refractive index 1. The transmission efficiencyand Quality factor for our proposed demultiplexer, respectively, are more than 65% and1600. The normalized transmissio...
متن کاملAlignment and Position Sensors Based on Split Ring Resonators
In this paper compact alignment and position sensors based on coplanar waveguide (CPW) transmission lines loaded with split ring resonators (SRRs) are proposed. The structure consists of a folded CPW loaded with two SRRs tuned at different frequencies to detect both the lack of alignment and the two-dimensional linear displacement magnitude. Two additional resonators (also tuned at different fr...
متن کاملA Compact Ultra-Wideband Filter Based on Left Handed Transmission Line by Using Complementary Split Ring Resonators and Series Capacitor
A compact and sharp rejection UWB microstrip bandpass filter is developed using left handed metamaterials. For realizing a backward-wave propagation medium, two split ring resonator (CSRR) in the back substrate side and also one series capacitor etched in the host line, are used to produce a negative effective ε and μ, simultaneously. Moreover, in the proposed structure, two doublets parallel c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 20 9 شماره
صفحات -
تاریخ انتشار 2012