The Effects of Friction on the Compressive Behaviour of High Strength Steels
نویسندگان
چکیده
An investigation. covering a wide range of strain rate and temperature. has been performed into the effects of interfacial friction on the compressive properties of an arniour plate steel. In order to calculate the coefficient of friction, ring tests were carried out and the Avitzur analysis applied. In general. coefficients of friction decreased with increasing temperature and strain rate. Other specimen observations indicated the same friction trends. It is essential that friction corrections be applied if meaningful results are to be obtained. Resume : Une etude qui uaite une selection de vitesses de deformation et de temperatures est realisee akin de connaitre les effets d'un frottement intert'dcial sur le comportement sous pression d'une plaque d'acier i blindage. Des calculs d'anneaux sont effectuis et I'analyse d'Avitzur appliqute afin de calculer la coefficiet~t de frottement. En general, les coefficienr de frottement baissent ?i une temperature et une viresse de dkformarion plus elevees. Plusieurs auues observalions indiquent la mtme tendance du frottement. I1 est essentiel que les corrections du frottement soienr appliqukes atin d'obtenir des resultats signiticatifs.
منابع مشابه
Effect of Heat Input on Microstructure and Mechanical Properties in Friction Stir Welding of HSLA-60
High-strength low alloy steels are a class of steels used in applications that require high strength and good weldability, including ship hulls, gas pipelines and oil industry. One way to build parts is fusion welding that create areas with a large grain size in the heat-affected zone and increased susceptibility to hydrogen cracking. One way to solve this problem is to use solid state friction...
متن کاملEffect of Heat Input on Microstructure and Mechanical Properties in Friction Stir Welding of HSLA-60
High-strength low alloy steels are a class of steels used in applications that require high strength and good weldability, including ship hulls, gas pipelines and oil industry. One way to build parts is fusion welding that create areas with a large grain size in the heat-affected zone and increased susceptibility to hydrogen cracking. One way to solve this problem is to use solid state friction...
متن کاملEffects of Waste Fibers Stabilizers on the Draindown and Moisture Damage Sensitivity Properties of SMA Mixtures
Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...
متن کاملDistinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model
This paper aims to study the mechanical behaviour and failure mechanism of intact rocks under different loading conditions using the grain based model implemented in the universal distinct element code (UDEC). The grain based numerical model is a powerful tool to investigate complicated micro-structural mechanical behaviour of rocks. In the UDEC grain based model, the intact material is simulat...
متن کاملEffect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study)
In an era of continued economic development around the globe, numerous rock-related projects including mining and gas/oil exploration are undertaken in regions with cold climates. Winters in the Iranian western and northwestern provinces are characterized by a high precipitation rate and a cold weather. Under such conditions, rocks are exposed to long freezing periods and several freeze-thaw (F...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016