Effective Dynamic Stiffness Model and Its Effects on Robot Safety and Performance
نویسندگان
چکیده
Due to the limited control bandwidth of pneumatic artificial muscles, joint stiffness characteristics and their effects on safety and performance of human-friendly robots should be considered in the frequency domain. This paper introduces the concept of effective dynamic stiffness and validates its model with the Stanford Safety Robot. Experimental results show that the dynamic stiffness demonstrates limited effects on the impact acceleration given the same impact velocity and controller gain, whereas it significantly affects control performance of position tracking due to pressure-induced non-linearities. A stiffness optimization strategy for safety and performance is discussed as a design guideline of human-friendly robots.
منابع مشابه
Performance Analysis of a Repairable Robot Safety System with Standby, Imperfect Coverage and Reboot Delay
The present study deals with a robot safety system composed of standby robot units and inbuilt safety unit. When the main operative unit fails, it is replaced by the standby robot unit available in the system. The concept of reboot delay is also incorporated in this study according to which the robot unit is rebooted if it is not successfully recovered. The recovery and reboot times of failed u...
متن کاملEffects of Moving Landmark’s Speed on Multi-Robot Simultaneous Localization and Mapping in Dynamic Environments
Even when simultaneous localization and mapping (SLAM) solutions have been broadly developed, the vast majority of them relate to a single robot performing measurements in static environments. Researches show that the performance of SLAM algorithms deteriorates under dynamic environments. In this paper, a multi-robot simultaneous localization and mapping (MR-SLAM) system is implemented within a...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملInvestigation on the Effect of Different Parameters in Wheeled Mobile Robot Error (TECHNICAL NOTE)
This article has focused on evaluation and identification of effective parameters in positioning performance with an odometry approach of an omni-directional mobile robot. Although there has been research in this field, but in this paper, a new approach has been proposed for mobile robot in positioning performance. With respect to experimental investigations of different parameters in omni-dire...
متن کاملPerformance Analysis of an Industrial Robot Under Uniform Temperature Change
The effect of temperature change on dynamic performances of an industrial robot with six axes of freedom is studied in this paper. In general, the strain and stress are produced not only by the external exciting force, but also by temperature change. The strain energy that is caused by temperatureThis paper describes how the temperature variation effects the dynamic performance of an indu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014