Passive One-Way-Delay Measurements and Data Export
نویسندگان
چکیده
This document describes a non-intrusive method for measuring one-way delay of IP packets. Furthermore it describes how to use NetFlow Version 9 to export the data of such measurements and evaluation processes.
منابع مشابه
Poster 04 – Evaluation of Building Blocks for Passive One-way-delay Measurements
Service Level Agreements (SLAs) specify the Quality of Services (QoS) negotiated between provider and customer. QoS Measurements provide a suitable way to proof the fulfillment of the given guarantees. During service usage the traffic of interest is already present in the network. This traffic can be utilized for passive (non-intrusive) measurement methods avoiding the disadvantages of sending ...
متن کاملComparative Measurements of Radon Concentration in Soil Using Passive and Active Methods in High Level Natural Radiation Area (HLNRA) of Ramsar
Background: Radon and its daughters are amongst the most important sources of natural exposure in the world. Soil is one of the significant sources of radon/thoron due to both radium and thorium so that the emanated thoron from it may cause increased uncertainties in radon measurements. Recently, a diffusion chamber has been designed and optimized for passive discriminative measurements of rado...
متن کاملOne-Way Transit Time Measurements
The main goals of the technical report are towards an understanding of the delay process in best-effort Internet for both non-congested and congested networks. A dedicated measurement system is reported for delay measurements in IP routers, which follows specifications of the IETF RFC 2679. The system is using both passive measurements and active probing. Dedicated application-layer software is...
متن کاملMeasurement of One-Way Transit Time in IP Routers
The main goals of the tutorial are towards an understanding of the delay process in best-effort Internet for both non-congested and congested networks. A novel measurement system is reported for delay measurements in IP routers, which follows specifications of the IETF RFC 2679. The system is using both passive measurements and active probing and offers the possibility to measure and analyze di...
متن کاملHYbrid Network Engineering Software (HYNES)
A management-plane solution that monitors aggregate traffic (e.g., by reading SNMP MIBs) and decides where to add circuits (network engineering) and/or which IP traffic to reroute (traffic engineering) is not likely to have much value in ESnet because average loading on ESnet links is light (5-10%). Inspite of these light loads, ESnet deployed a dynamic-circuit network called the Science Data N...
متن کامل