High sensitivity, time integrated measurement devices
نویسنده
چکیده
High sensitivity, ring4ype measurement devices based on acoustooptic and fiberoptic delay lines are described. Applications of these devices for linear and angular displacements with resolution of O.1&m and lj.trad are shown. Methods offurther improvement ofthe devices' characteristics are discussed.
منابع مشابه
Total Radiated Power Measurement for Antenna Integrated Radios Using a Spheroidal Coupler
Recently we see rapid increases of 'antenna integrated radios' such as RFID and UWB devices in addition to cellular phones and wireless LAN. These devices, having no monitoring terminals of Tx output power, must be tested based on radiation measurement where performances are expressed in terms of total radiated power (TRP). There exist several method for measuring TRP [1] – [3]. These methods, ...
متن کاملQuasi-digital front-ends for current measurement in integrated circuits with giant magnetoresistance technology
In this study, the authors report on two different electronic interfaces for low-power integrated circuits electric current monitoring through current-to-frequency (I–f) conversion schemes. This proposal displays the intrinsic advantages of the quasidigital systems regarding direct interfacing and self-calibrating capabilities. In addition, as current-sensing devices, they have made use of the ...
متن کاملHigh-throughput fluorescence detection using an integrated zone-plate array.
Microfluidic devices enable massive parallelization of sample manipulation and delivery, but a similarly parallelized and integrated optical detection system does not yet exist. Standard large numerical aperture wide field or scanning optical systems are not capable of the large field of view and detection sensitivity required to collect fluorescence from parallel arrays of microfluidic devices...
متن کاملImmunoassay of C-reactive protein by hot electron induced electrochemiluminescence using integrated electrodes with hydrophobic sample confinement.
C-reactive protein (CRP) was determined in the concentration range 0.01-10 mg L(-1) using hot electron induced electrochemiluminescence (HECL) with devices combining both working and counter electrodes and sample confinement on a single chip. The sample area on the electrodes was defined by a hydrophobic ring, which enabled dispensing the reagents and the analyte directly on the electrode. Immu...
متن کاملEnd-coupled optical waveguide MEMS devices in the indium phosphide material system
We demonstrate electrostatically actuated end-coupled optical waveguide devices in the indium phosphide (InP) material system. The design of a suitable layer structure and fabrication process for actuated InP-based waveguide micro-electro-mechanical systems (MEMS) is reviewed. Critical issues for optical design, such as coupling losses, are discussed and their effect on device performance is ev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004