Analysis of Key Fuel Properties inside Combination Electronic Unit Pump Fuel Pipeline
نویسندگان
چکیده
Because of high pressure fluctuations in Combination Electronic Unit Pump (CEUP) system during fuel injection cycles, physical properties of diesel fuel including density, acoustic wave speed and bulk modulus also vary. These physical properties of fuel have significant importance in predicting the fuel injection behavior and its optimization. A 1D viscous damped mathematical model of wave equation has been developed in MATLAB not only to simulate the pressure fluctuations in fuel pipeline at various operating conditions of diesel engine but also to determine and analyze the variations in these physical properties of diesel fuel.
منابع مشابه
Analysis of Diesel and Rapeseed Methyl Ester Properties in Ceup Fuel Pipeline Using Frequency Dependent Damping Model
During a fuel injection cycle pressure inside Combination Electronic Unit Pump (CEUP) fuel injection system varies from low (~50 bars) to very high (~1500 bars) in fractions of seconds depending on the operating conditions. Physical properties of fuel including density, acoustic wave speed and bulk modulus also vary as a function of rapidly varying fuel pressure. A detailed analysis of these ke...
متن کاملAPPLIED OF IMPRESSED CURRENT CATHODIC PROTECTION DESIGN FOR FUEL PIPELINE NETWORK AT NAVAL BASE
Indonesian Navy (TNI AL) is the main component for Maritime Security and Defence. Because of that, TNI AL needs Indonesian Warship (KRI) to covered Maritime area. The main requirement from KRI is fulfilled by demand. To pock of fuel demand from KRI at Naval Base, it needs a new pipeline of fuel distribution network system. The pipeline network system used for maximum lifetime must be protected ...
متن کاملElectronic Returnless Fuel System Fault Diagnosis and Isolation: A Data-Driven Approach
The Electronic Return-less Fuel System (ERFS) manages the delivery of fuel from the fuel tank to the engine. The pressure in the fuel line is electronically controlled by the fuel system control module by speeding up or slowing down the fuel pump. This allows the system to efficiently control the amount of fuel provided to the engine when compared to vehicles equipped with a standard fuel syste...
متن کاملAutomotive Systems
Automotive Systems A u to m o tive Sstem s Th e fuel pressure control system (FPCS) was developed to comply with increasingly strict fuel-effi ciency and emissions regulations by improving fuel economy and reducing emissions. It controls the discharge fl ow rate of the fuel pump and fuel injection pressure in accordance with engine operating conditions. Past fuel supply systems have operated th...
متن کاملResearch and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE)
Due to the shortage of liquid hydrocarbon fuels for compression ignition engines, researchers have constantly been looking for alternative fuels. Recently, dim ethyl ether (DME) with its interesting properties, such as high cetane number and low exhaust emission has drawn a lot of interst as a suitable fuel for diesel engines. The main objective of this study was to assess the potentials and fe...
متن کامل