COMPUTER SIMULATION OF THE KINETICS OF ORDER-DISORDER AND PHASE SEPARATION DURING PRECIPITATION OF 6 ’ (A13Li) IN Al-L1 ALLOYS
نویسنده
چکیده
A computer simulation study has been performed of the reaction paths for the precipitation of 6 ’ (Al?Li) ordered particles from a disordered matrix (z) in Al-Li alloys, using microscopic Lang&in diffusion equations. It is found that the precipitation of 6’ occurs either by a congruent ordering process followed by decomposition, or by a non-classical nucleation mechanism which requires critical fluctuations of both composition and order parameter, except in a narrow range of compositions near the equilibrium phase boundary of the disordered phase, where classical nucleation theory seems to be applicable. Composition and order parameter profiles across a critical nucleus were obtained for different compositions in the nucleation and growth regime, and compared with those obtained from the continuum non-classical nucleation theory. Possible origins for the discrepancies in the precipitation mechanism, obtained from different theoretical and experimental studies, are suggested. Copyright #J1996 Actu Metallurgica Inc.
منابع مشابه
EXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS
Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...
متن کاملPhase decomposition and reversion in Al-Li alloys
After overview on the behaviour of first order order/disorder phase transformation based on the instability diagrams, the results of in-situ SR-SAS measurements have been reported in order to clarify the process of transformation, the growth mechanism of metastable Llz phase and its coarsening as well as the reversion process in Al-Li alloys. The results were compared with computer simulation b...
متن کاملComputational Kinetics Simulation of the Dissolution and Coarsening in the HAZ during Laser Welding of 6061-T6 Al-Alloy
-s 211 WELDING JOURNAL ABSTRACT. Laser beam welding (LBW) has become common practice in the production lines of several industrial sectors including the electronics, domestic appliances, and automotive industries. The advantages of LBW over conventional fusion welding processes (mainly GMAW and GTAW) is the lower welding heat input and smaller weld pool and HAZ dimensions, which are associated ...
متن کاملComputer Simulation of Converter Fed Synchronuse Machine Drives Contaning Space Harmonics
In this Paper, complete models of three and six phase self commutated synchronous machine drives are presented, considering the effects of both time and space harmonics. First, the equations for calculation of machine inductances are developed. Next, "thyristor-inverter-electric machine" set is modeled in order to derive all the equations for conduction and commutation states. Finally, the resu...
متن کاملشبیه سازی ذوب سیستمهای دو بعدی
The study of a two-dimensional (2-D) system started nearly half a century ago when Peierls and Landau showed the lack of long range translational order in a two-dimensional solid. In 1968, Mermin proved that despite the absence of long range translational order. Two-dimensional solids can still exhibit a different kind of long range bond orientation. During the last decade, fascinating theori...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003