Numerical simulation of time-dependent fracture of graded bimaterial metallic interfaces

Stationary cracks along and near interfaces between two time-dependent materials are simulated using the finite element method (FEM) to examine crack tip fields and candidate driving force parameters for crack growth. Plane strain conditions are assumed. In some cases, a thin transition layer is included between the two materials. This transition layer features a functionally graded blend of properties of the two materials. An example of such a system is that of weld metal (WM) and base metal (BM) in a weldment, with the transition layer corresponding to the heat-affected zone (HAZ). Numerical solutions for the stress and strain fields of homogeneous and heterogeneous Compact Tension (C(T)-type) specimens are presented. The equivalent domain integral technique is employed to compute the J -integral for elastic-plastic cases as well as the C(t)-integral and transition times for creep behavior. Results from parametric studies are curve-fit in terms of transition layer thickness and crack position, inelastic property mismatches, and other independent model parameters. Results indicate that the incorporation of functionally graded transition layer regions leads to less concentrated stress and strain components along interfaces ahead of the crack tip. It is also shown that the computed fracture parameters are influenced by the transition layer properties.