Immobilization of CALB on activated chitosan: Application to enzymatic synthesis in supercritical and near-critical carbon dioxide

نویسندگان

  • José C.S. dos Santos
  • Horacio L. Bonazza
  • Leonardo J.B.L. de Matos
  • Elizabete A. Carneiro
  • Oveimar Barbosa
  • Roberto Fernandez-Lafuente
  • Luciana R.B. Gonçalves
  • Hosiberto B. de Sant’ Ana
  • Rílvia S. Santiago-Aguiar
چکیده

The objective of this new paper was to evaluate the enzymatic esterification reaction conducted in supercritical or near-critical CO2, catalyzed by immobilized lipase B from Candida antarctica (CALB). The biocatalyst was prepared through the immobilization of CALB by covalent attachment using chitosan sequentially activated with Glycidol, ethylenediamine (EDA) and glutaraldehyde as support. In order to determine the best operational conditions of the esterification reaction (1: 1 (alcohol-acid); biocatalyst content, 10% (by substrate mass); 45 °C), an experimental design (23) was conducted to evaluate the effects of the following parameters: alcohol to oil molar ratios, reaction time and temperature. The maximum loading of chitosan was 20 mg protein/g support, and the thermal and solvent stability of the new biocatalyst was higher than that of the CALB-GX (by a 26-fold factor), CALB-OC (by a 53-fold factor) and Novozym 435 (by a 3-fold factor). The maximum conversion was 46.9% at a temperature of 29.9 °C, ethanol to oleic acid molar ratio equal to 4.50:1, and a reaction time of 6.5 h. Additionally, the removal of water from the medium, by using molecular sieves, promoted a 16.0% increase in the conversion of oleic acid into ethyl esters.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Continuous Synthesis of Oleyl Oleate in Supercritical Carbon Dioxide using Solid p-Toluenesulfonic Acid as Catalyst

Supercritical carbon dioxide (SC-CO2) was used as solvent to synthesize oleyl oleate as an analog of Jojoba oil from oleic acid and oleyl alcohol with high conversion (100%) of the acid into ester in a short time of 100 min. Utilizing a low cost solid catalyst, p-toluenesulfonic acid monohydrate (PTSA), the esterification reaction was performed, without any prior preparation step...

متن کامل

Synthesis of polyvinyl pyridine/C60 conjugates in supercritical carbon dioxide*

In the present investigation efforts have been made to synthesis polyvinyl pyridine (PvPy) /C60 conjugates through 2, 2-azobisisobutyronitrile (AIBN) initiated insitu polymerization of PvPy in scCO2.The process of synthesis was monitored under different reaction conditions ranging 1200-1800psi, 60-90 oC over 6 hours. The progress of polymerization was monitored rheoviscometrically. The concentr...

متن کامل

Measurement and Modeling of Acridine Solubility in Supercritical Carbon Dioxide

Supercritical carbon dioxide has gained increasing attention in food and pharmaceutical processing owing to the fact that it is environmentally inexpensive, not flammable, essentially non-toxic, and it has a convenient critical point. Also, it has been attracting much attention in many fields, such as extraction of sensitive materials and pharmaceutical processing and polymerization processes. ...

متن کامل

Dispersion Coefficients of Supercritical Fluid in Fixed Beds

The axial dispersion coefficient of hexachlorobenzene in supercritical carbon dioxide is investigated in a fixed-bed packed with glass beads. The on-line chromatographic pulse-response experiment is used in order to study the dynamics of a packed column under supercritical conditions. The radial dispersion is assumed negligible because of the packed column geometry. To estimate the axial disper...

متن کامل

A New Method to Calculate the Absolute Amount of High-Pressure Adsorption of Supercritical Fluid

In the paper we developed a new method to determine the absolute amount of adsorption. This method relies on the excess adsorption isotherm and the density profile in the pore of one material. To compute the density profile and decrease complex calculation of obtaining the absolute amount of adsorption we introduced Simplified Local-Density (SLD) model. A few of appropriate parameters were ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 14  شماره 

صفحات  -

تاریخ انتشار 2017