Active Control of Three Surface Wind Tunnel Aeroelastic Demonstrator: Modelling and Correlation
نویسندگان
چکیده
Abstract. This article describes the methodology adopted to implement an ILAF control system on a three surface aeroelastic demonstrator with the aim of shaping fuselage modal dynamics. General concepts used, hypotheses formulated and numerical results are provided to show that a numerical simulation involving reduced order models for aeroelastic models is suitable, even at a very early design stage, especially when a control system is developed starting from scratch. Correlations with experimental wind tunnel testing show a remarkable correlation between numerical and experimental dynamic.
منابع مشابه
Numerical aeroelastic analysis of wind turbine NREL Phase VI Rotor
This study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient FSI1 responses of HAWT2. Aerodynamic response was obtained by 3D CFD-URANS approach and structural response was obtained by 3D Finite element method. Aeroelastic responses of the blade were obtained by ...
متن کاملWind Tunnel to Atmospheric Mapping for Static Aeroelastic Scaling
Wind tunnel to Atmospheric Mapping (WAM) is a methodology for scaling and testing a static aeroelastic wind tunnel model. The WAM procedure employs scaling laws to define a wind tunnel model and wind tunnel test points such that the static aeroelastic flight test data and wind tunnel data will be correlated throughout the test envelopes. This methodology extends the notion that a single test co...
متن کاملDesign and Testing of Flexible Aircraft Structures
Methods for structural design, control, and testing of flexible aircraft structures are considered. Focus is on nonconventional aircraft configurations and control concepts. The interaction between analysis and testing is a central topic and all studies include validation testing and comparison between computational and experimental results. The first part of the thesis is concerned with the de...
متن کاملNumerical aeroelastic analysis of wind turbine NREL Phase VI Rotor
This study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient FSI[1] responses of HAWT[2]. Aerodynamic response was obtained by 3D CFD-URANS approach and structural response was obtained by 3D Finite element method. ...
متن کاملA robust engineering approach for wind turbine blade profile aeroelastic computation
Wind turbines are important devices that extract clean energy from wind flow. The efficiency of wind turbines should be examined under various working conditions in order to estimate off-design performance. Numerous aerodynamic and structural research works have been carried out to compute aeroelastic effects on wind turbines. Most of them suffer from either the simplicity of the modelling ...
متن کامل