Viscosity of liquid perfluoroalkanes and perfluoroalkylalkane surfactants.

نویسندگان

  • Pedro Morgado
  • Carlos M C Laginhas
  • J Ben Lewis
  • Clare McCabe
  • Luís F G Martins
  • Eduardo J M Filipe
چکیده

As part of a systematic study of the thermophysical properties of two important classes of fluorinated organic compounds (perfluoroalkanes and perfluoroalkylalkanes), viscosity measurements of four n-perfluoroalkanes and five perfluoroalkylalkanes have been carried out at atmospheric pressure and over a wide range of temperatures (278-353 K). From the experimental results the contribution to the viscosity from the CF(2) and CF(3) groups as a function of temperature have been estimated. Similarly, the contributions for CH(2) and CH(3) groups in n-alkanes have been determined using literature data. For perfluoroalkylalkanes, the viscosity results were interpreted in terms of the contributions of the constituent CF(2), CF(3), CH(2), and CH(3) groups, the deviations from ideality on mixing hydrogenated and fluorinated chains, and the contribution due to the formation of the CF(2)-CH(2) bond. A standard empirical group contribution method (Sastri-Rao method) has also been used to estimate the viscosities of the perfluoroalkylalkanes. Finally, to obtain molecular level insight into the behavior of these molecules, all-atom molecular dynamics simulations have been performed and used to calculate the densities and viscosities of the perfluoroalkylalkanes studied. Although both quantities are underestimated compared to the experimental data, with the viscosities showing the largest deviations, the trends observed in the experimental viscosities are captured.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Systems involving hydrogenated and fluorinated chains: volumetric properties of perfluoroalkanes and perfluoroalkylalkane surfactants.

As part of a combined experimental and theoretical study of the thermodynamic properties of perfluoroalkylalkanes (PFAAs), the liquid density of perfluorobutylpentane (F4H5), perfluorobutylhexane (F4H6), and perfluorobutyloctane (F4H8) was measured as a function of temperature from 278.15 to 353.15 K and from atmospheric pressure to 70 MPa. The liquid densities of n-perfluoropentane, n-perfluor...

متن کامل

Liquid phase behavior of perfluoroalkylalkane surfactants.

We have performed a combined experimental and theoretical study of the thermodynamic properties of semifluorinated alkanes. In particular, the liquid density of perfluorohexylhexane (F6H6) and perfluorohexyloctane (F6H8) has been measured as a function of temperature from 273.15 to 353.15 K and at four temperatures as a function of pressure up to 600 bar. The results were interpreted using the ...

متن کامل

بررسی تاثیر مقدار امولسیفایر و فاز روغنی بر HLB بحرانی فاز روغنی و ویسکوزیته امولسیون پارافین مایع

Background and purpose: Ëmulsion are the systems developed from due ho minimal distribution of a non liquid in onoter liquid and in contrast to micro emulsions, stabilized are non strabilized. Their stability can be increased by increasing surface active agents. Since the amount og surfactant being used and volumic percentage of oil phase can effect the properties of wmulsion. This study was ...

متن کامل

Liquid-vapor equilibria and interfacial properties of n-alkanes and perfluoroalkanes by molecular simulation.

A molecular dynamics study is presented to assess the performance of a united-atom model in the prediction of liquid-vapor interfacial properties for short-chain perfluoroalkanes and their alkane counterparts. In particular, the ability of this model to discriminate between the surface-energy values of these two types of compounds was investigated over a wide temperature range corresponding to ...

متن کامل

An Experimental Study of Acid Diversion by Using Gelled Acid Systems Based on Viscoelastic Surfactants: A Case Study on One of Iran Southwest Oilfields

In matrix acidizing operations, the main goal is increasing permeability. For production engineers, it is desirable that acid could be injected into whole [M.N.1] [amehri.gh2] pay zone. Sometimes, this pay zone has a long height and various sub-layers which have different permeability values. To prevent acid from going completely into the most permeable sub-layer, one of the useful techniques i...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The journal of physical chemistry. B

دوره 115 29  شماره 

صفحات  -

تاریخ انتشار 2011