Ga-a24514 System Design and Performance for the Upgrade Recent Diii-d Neutral Beam Computer

This operating year marks an upgrade to the computer system charged with control and data acquisition for neutral beam injection system’s heating at the DIII-D National Fusion Facility, funded by the US. Department of Energy and operated by General Atomics (GA), This upgrade represents the third and latest major revision to a system which has been in service over twenty years. The first control and data acquisition computers were four 16 bit “mini” computers running a proprietary operating system. Each of the four controlled two ion source over dedicated CAMAC highway. In a 1995 upgrade, the system evolved to be two 32 bit Motorola mini-computers running a version of UNIX. Each computer controlled four ion sources with two CAMAC highways per CPU. This latest upgrade builds on this same logical organization, but makes significant advances in cost, maintainability, and the degree to which the system is open to future modification. The new control and data acquisition system is formed of two 2 GHz Intel Pentium 4 based PC’s, running the LINUX operating system. Each PC drives two CAMAC serial highways using a combination of Kinetic Systems PCI standard CAMAC Hardware Drivers and a low-level software driver written inhouse expressly for this device. This paper discusses the overall system design and implementation detail, describing actual operating experience for the initial six months of operation.